Toughened safety glass in Aberystwyth

Toughened safety glass in Aberystwyth: what will it cost?

Our guide range for toughened safety glass is £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Work in Aberystwyth is arranged individually, so travel and glass delivery are confirmed in your written price before anything is booked.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Glass and fitting options

Clear, tinted, obscure, low-iron and sandblasted finishes
Breaks into small blunt fragments
Made to BS EN 12150 and marked for identification
Made to measure for each opening
Holes, notches and polished edges for frameless fittings
Single panes or the outer pane of a sealed unit

Fitting in Aberystwyth

Surveys and fitting in Aberystwyth are arranged case by case because of travel and glass delivery. Tell us about the job and we will come back with options.

Dyfed covers the town-centre shops of Carmarthen and Llanelli, the university town of Aberystwyth, and Pembrokeshire harbour towns such as Tenby, with exposed properties along the west coast.

Typical settings for toughened safety glass:

Frameless office partitions and doors
Shower screens and splashbacks
Balustrades in a laminated toughened makeup
Glazed doors and side panels

Getting the right glass for your building

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

What the rules say in Wales

Wales

Replacing glass in an existing frame

Welsh Government guidance says building regulations have applied to replacement glazing since 1 April 2002, which covers replacing windows and doors. Swapping only the glass or a sealed unit in an existing frame is generally treated as a repair. New glass in a critical location should still be safety glass, and the council's building control team can confirm anything unclear.

Fire-rated glass is different

Glass in fire doors and fire screens must be fire-rated glass tested as part of that door or screen, under Approved Document B for Wales and, in non-domestic premises, the Regulatory Reform (Fire Safety) Order 2005. Security and laminated glass are not fire-rated unless the product is tested for it, so the two cannot simply be swapped.

How it works

Send sizes, photos and your postcode
We confirm what is possible and when
Fixed price in writing
Glass made, delivered and fitted

Toughened safety glass in Aberystwyth: questions

Can you work in Aberystwyth?

Work in Aberystwyth is arranged individually because of travel. Send your postcode and details and we will confirm what is possible.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Other glazing in Aberystwyth

Send sizes and photos with the form, or call 0800 088 6248.