Toughened safety glass in County Antrim

How much should I budget for toughened safety glass in County Antrim?

Budget £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in County Antrim, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Glass and fitting options

Breaks into small blunt fragments
Holes, notches and polished edges for frameless fittings
Heat-soaked option for large and overhead panes
Four to five times the strength of annealed glass
Made to measure for each opening
Clear, tinted, obscure, low-iron and sandblasted finishes

Covering County Antrim

We can arrange surveys and fitting anywhere in County Antrim, including Antrim and Ballymena. Dates depend on installer availability. Choose your town below for local details.

County Antrim includes much of Belfast's Victorian commercial centre, Titanic Quarter offices and suburban high streets, plus Lisburn, Ballymena and the towns of the north coast.

Common uses:

Balustrades in a laminated toughened makeup
Shower screens and splashbacks
Panes below 800 mm in homes and offices
Glazed doors and side panels

Towns in County Antrim

What to think about first

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Consents and safety: Northern Ireland

Northern Ireland

Safety glass in critical locations

In Northern Ireland, safety glazing is covered by Part V of the Building Regulations (Northern Ireland) 2012, with guidance in Technical Booklet V. It follows a critical-location approach similar to Great Britain, covering glazing in and beside doors and at low level. Laminated or toughened safety glass is the usual answer; building control at the council can confirm the detail.

Glazing in workplaces

The Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993 contain an equivalent requirement to Great Britain's: windows and transparent surfaces in walls, partitions, doors and gates must be of safety material or protected where health or safety requires it, and marked so they are apparent. The employer's risk assessment decides where.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Toughened safety glass in County Antrim: questions

Which towns in County Antrim do you cover?

We can arrange work anywhere in County Antrim, including Antrim, Ballymena, Ballymoney, Belfast and Carrickfergus, and in other towns across the area.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Other glazing in County Antrim

Start with a guide price online, then we survey and fix the price in writing.