Toughened safety glass in Cornwall: what will it cost?
Guide prices for toughened safety glass in Cornwall are £114 to £414 including VAT (£95 to £345 plus VAT) per pane for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.
Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.
What goes into toughened safety glass
- Made to BS EN 12150 and marked for identification
- Heat-soaked option for large and overhead panes
- Breaks into small blunt fragments
- Made to measure for each opening
- Holes, notches and polished edges for frameless fittings
- Single panes or the outer pane of a sealed unit
Covering Cornwall
We can arrange surveys and fitting anywhere in Cornwall, including Redruth and Falmouth. Dates depend on installer availability. Choose your town below for local details.
Cornwall's granite and slate cottages, harbourside shops and holiday lets face salt-laden coastal weather, and towns such as Truro, Falmouth and St Ives have conservation areas in their centres.
Typical settings for toughened safety glass:
- Panes below 800 mm in homes and offices
- Shower screens and splashbacks
- Frameless office partitions and doors
- Glazed doors and side panels
Towns in Cornwall
Getting the right glass for your building
Toughened or laminated
Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.
Barriers and balustrades
Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.
What the rules say in England
Fire-rated glass is different
Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.
How it works
- Send sizes or use the quote tool
- Free survey at your Cornwall address
- Fixed price in writing
- Glass made, then fitted
Toughened safety glass in Cornwall: questions
Which towns in Cornwall do you cover?
We can arrange work anywhere in Cornwall, including Redruth, Falmouth, St Austell, Truro and Camborne, and in other towns across the area.
Can toughened glass be cut to fit?
No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.
Why did my toughened glass break on its own?
Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.
How can I tell if glass is toughened?
Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.
Other glazing in Cornwall
- Anti-bandit glass
- Anti-ram-raid glazing
- Security glass for doors
- Laminated glass retrofit
- Security double-glazed units
- Glazing bead security upgrades
Ready for a price? Use the form or call 0800 088 6248.