Toughened safety glass in Wrexham: what will it cost?
Guide prices for toughened safety glass in Wrexham are £114 to £414 including VAT (£95 to £345 plus VAT) per pane for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.
Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.
Specification at a glance
- Made to measure for each opening
- Made to BS EN 12150 and marked for identification
- Holes, notches and polished edges for frameless fittings
- Four to five times the strength of annealed glass
- Single panes or the outer pane of a sealed unit
- Clear, tinted, obscure, low-iron and sandblasted finishes
Fitting in Wrexham and nearby
We arrange surveys and fitting across Wrexham and the LL13 postcode district, and in nearby Rhosllanerchrugog (4 miles), Buckley (9 miles) and Hawarden.
Clwyd takes in Wrexham's town centre and industrial estates, Deeside's business parks, Victorian seaside towns such as Rhyl and Colwyn Bay, and stone market towns like Ruthin and Denbigh.
Typical settings for toughened safety glass:
- Balustrades in a laminated toughened makeup
- Panes below 800 mm in homes and offices
- Frameless office partitions and doors
- Glazed doors and side panels
Getting the right glass for your building
Measure once, carefully
Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.
Heat soaking
Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.
What the rules say in Wales
Fire-rated glass is different
Glass in fire doors and fire screens must be fire-rated glass tested as part of that door or screen, under Approved Document B for Wales and, in non-domestic premises, the Regulatory Reform (Fire Safety) Order 2005. Security and laminated glass are not fire-rated unless the product is tested for it, so the two cannot simply be swapped.
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 applies in Wales. Windows and transparent surfaces in walls, partitions, doors and gates must be of safety material or protected against breakage where health or safety requires it, and marked so they are apparent. The employer's risk assessment decides where that applies.
How it works
- Tell us about the glazing
- Survey, measuring and frame check
- Written quote naming the glass
- Fitting and handover
Toughened safety glass in Wrexham: questions
Do you cover Rhosllanerchrugog as well as Wrexham?
Yes. As well as Wrexham, we can arrange surveys in nearby Rhosllanerchrugog, Buckley and Hawarden. Dates depend on installer availability.
How can I tell if glass is toughened?
Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.
Can toughened glass be cut to fit?
No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.
Is toughened glass a security glass?
No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.
Toughened safety glass in nearby towns
Other glazing in Wrexham
- Anti-bandit glass
- Bullet-resistant glass
- Display case security glass
- Patio and bifold door security glass
- Shopfront security glass
- Misted unit replacement with laminated glass
Get a guide price now and book your free survey in Wrexham.