Toughened safety glass in Amersham

How much does toughened safety glass cost in Amersham?

Budget £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Amersham, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Four to five times the strength of annealed glass
Made to BS EN 12150 and marked for identification
Single panes or the outer pane of a sealed unit
Holes, notches and polished edges for frameless fittings
Made to measure for each opening
Heat-soaked option for large and overhead panes

Fitting in Amersham and nearby

We can arrange toughened safety glass anywhere in Amersham, and in nearby Chesham, Chalfont St Peter and Gerrards Cross. Tell us your postcode and we will offer dates.

Milton Keynes' glass-fronted shopping centre and business districts contrast with Buckinghamshire's older towns, where Aylesbury, Amersham and Marlow keep many period shopfronts.

Typical places for toughened safety glass:

Panes below 800 mm in homes and offices
Balustrades in a laminated toughened makeup
Frameless office partitions and doors
Shower screens and splashbacks

Things to decide before you order

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Rules that apply in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Send sizes or use the quote tool
Free survey at your Amersham address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Amersham: questions

Which areas near Amersham do you cover?

We can arrange work in Amersham and in nearby Chesham (2 miles), Chalfont St Peter (5 miles) and Gerrards Cross (6 miles). Dates depend on installer availability.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Amersham

Ready for a price? Use the form or call 0800 088 6248.