Toughened safety glass in Newbury

What is the price of toughened safety glass in Newbury?

Typical prices for toughened safety glass in Newbury are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

Heat-soaked option for large and overhead panes
Made to BS EN 12150 and marked for identification
Made to measure for each opening
Single panes or the outer pane of a sealed unit
Four to five times the strength of annealed glass
Clear, tinted, obscure, low-iron and sandblasted finishes

Fitting in Newbury and nearby

We arrange surveys and fitting in Newbury and across the RG14 postcode district, as well as in nearby Thatcham (3 miles) and Basingstoke (14 miles). Dates depend on installer availability.

Berkshire pairs the glass-fronted offices of Reading, Slough and Bracknell with Victorian and Edwardian housing and listed riverside buildings in Windsor and Eton.

This glazing suits:

Balustrades in a laminated toughened makeup
Frameless office partitions and doors
Glazed doors and side panels
Shower screens and splashbacks

Questions we will ask at the survey

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Building regulations and safety in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Send sizes or use the quote tool
Free survey at your Newbury address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Newbury: questions

Do you cover Thatcham as well as Newbury?

Yes. As well as Newbury, we can arrange surveys in nearby Thatcham, Basingstoke and Didcot. Dates depend on installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Toughened safety glass in nearby towns

Other glazing in Newbury

Ready for a price? Use the form or call 0800 088 6248.