How much does shopfront security glass cost in Fleet?
Our guide range for shopfront security glass in Fleet is £595 to £2,995 plus VAT (£714 to £3,594 inc VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.
Shopfront security glass is laminated glass sized for shop windows, entrance doors and side screens, chosen to a BS EN 356 class that suits the stock and the risk. It keeps the display fully visible while making smash-and-grab attempts slow, noisy and much less likely to succeed.
What you can specify
- Internal beads and anti-tamper fixings
- Manufacturer's test evidence supplied with your quote
- Framing checks and upgrades where frames are light
- Low-iron glass to keep displays true
- Large single panes and glazed entrance doors
- Work planned outside trading hours where possible
Fitting in Fleet and nearby
We arrange surveys and fitting in Fleet and across the GU51 postcode district, as well as in nearby Farnborough (3 miles) and Aldershot (4 miles). Dates depend on installer availability.
Hampshire covers the port-city shops and offices of Southampton and Portsmouth, Winchester's listed centre, and commuter estates around Basingstoke, Eastleigh and Fareham.
Typical places for shopfront security glass:
- Cafés, restaurants and takeaways
- Phone, electronics and vape shops
- Convenience stores and off-licences
- High-street shops and boutiques
Things to decide before you order
Glass or frame first
If the frame is shallow or light, upgrading the glass alone moves the weak point to the frame. We price both so you can decide.
Which class
Most shops do well with P2A to P4A. Jewellers and other high-value trades usually need P6B or above, often because their insurer says so.
Rules that apply in England
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
How it works
- Send sizes or use the quote tool
- Free survey at your Fleet address
- Fixed price in writing
- Glass made, then fitted
Shopfront security glass in Fleet: questions
Do you cover Farnborough as well as Fleet?
Yes. As well as Fleet, we can arrange surveys in nearby Farnborough, Aldershot and Yateley. Dates depend on installer availability.
Do I need planning permission to change shop glass?
Replacing glass in an existing shopfront does not normally need planning permission. Changing the shopfront design, adding external shutters or altering a listed building usually does.
Is my shop window toughened or laminated?
Look for the safety mark in a corner of the pane, or ask us to check at the survey. Many older shopfronts are toughened, which breaks completely and leaves the window open.
Can my insurer specify the glass?
Yes. Some insurers name a class for certain stock. Send us the wording and we will quote to it; the insurer decides whether the product meets their conditions.
Shopfront security glass in nearby towns
Other glazing in Fleet
- Glazing bead security upgrades
- Broken glass replacement
- Anti-bandit glass
- Kiosk and booth security glazing
- Toughened safety glass
- Laminated security glass
Ready for a price? Use the form or call 0800 088 6248.