How much should I budget for security window film in Sheffield?
Our guide range for security window film in Sheffield is £54 to £132 including VAT (£45 to £110 plus VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.
Security window film is a clear, tough polyester film bonded to the inside face of existing glass with a strong adhesive. When the glass breaks, the film holds the fragments together, which reduces injury from flying glass and slows down anyone trying to get through, without replacing the glass itself.
What goes into security window film
- Clear safety films from about 100 microns
- Security films of 200 microns and thicker
- Thermal-stress check on sealed units and coated glass
- Removable later without harming the glass
- Frosted and privacy versions for meeting rooms and bathrooms
- Edge-retention anchoring into the frame for blast mitigation
Fitting in Sheffield and nearby
Surveys in Sheffield (S1) are booked around installer availability, as they are in nearby Rotherham (6 miles) and Dronfield (6 miles).
South Yorkshire includes Sheffield's city-centre offices and shops, Victorian terraces along its valleys, and town centres in Doncaster, Rotherham and Barnsley ringed by retail parks.
Common uses:
- Existing shop windows that are not due for replacement
- School and office glazing in low-level positions
- Listed buildings where original glass must stay
- Large areas of glazing on a tight budget
What to think about first
Safety or security film
Thinner films improve how glass breaks; thicker films add resistance to attack. We match the film to what you want it to do.
Is the glass suitable
Some double-glazed units and coated or tinted glass can suffer heat stress with certain films. We check the glass and the unit maker's guidance first.
Consents and safety: England
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
Listed buildings and conservation areas
In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.
How it works
- Send sizes or use the quote tool
- Free survey at your Sheffield address
- Fixed price in writing
- Glass made, then fitted
Security window film in Sheffield: questions
Can you survey in Sheffield and nearby towns?
Yes. Surveys in Sheffield, Rotherham and Dronfield are booked around installer availability.
Can I still see through security film?
Yes. Security films are optically clear. Frosted and tinted versions are available where privacy or glare control is wanted.
Can film be used on listed buildings?
Film is fitted inside and can be removed, so it is often an acceptable way to protect historic glass. Check with the council's conservation officer for listed buildings.
Does security film make glass as strong as laminated glass?
Not usually. Film greatly improves how glass breaks and slows an attack, but it only matches a laminated glass class where that film and glass combination has been tested together.
Security window film in nearby towns
Other glazing in Sheffield
- Display case security glass
- Kiosk and booth security glazing
- Laminated glass retrofit
- Misted unit replacement with laminated glass
- Security glass for home windows
- Counter and reception security screens
Ready for a price? Use the form or call 0800 088 6248.