What is the price of security window film in Oxford?
Budget £54 to £132 including VAT (£45 to £110 plus VAT) per m² for security window film in Oxford, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.
Security window film is a clear, tough polyester film bonded to the inside face of existing glass with a strong adhesive. When the glass breaks, the film holds the fragments together, which reduces injury from flying glass and slows down anyone trying to get through, without replacing the glass itself.
Glass and fitting options
- Fitted on site without removing the glass
- Blocks most UV light to slow fading
- Removable later without harming the glass
- Edge-retention anchoring into the frame for blast mitigation
- Security films of 200 microns and thicker
- Frosted and privacy versions for meeting rooms and bathrooms
Fitting in Oxford and nearby
Surveys in Oxford (OX1) are booked around installer availability, as they are in nearby Abingdon (6 miles) and Didcot (10 miles).
Oxfordshire's college city and stone market towns such as Woodstock, Witney and Henley-on-Thames sit alongside business and science parks around Abingdon, Didcot and Bicester.
This glazing suits:
- Large areas of glazing on a tight budget
- Offices wanting flying-glass protection
- School and office glazing in low-level positions
- Listed buildings where original glass must stay
Questions we will ask at the survey
Daylight application or anchored
A film applied to the visible glass is quickest. Anchoring it to the frame holds the whole pane in place and is the choice for blast mitigation.
Is the glass suitable
Some double-glazed units and coated or tinted glass can suffer heat stress with certain films. We check the glass and the unit maker's guidance first.
Building regulations and safety in England
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
Listed buildings and conservation areas
In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.
How it works
- Postcode and a few photos
- On-site survey
- Fixed written price and lead time
- Fit, check and explain
Security window film in Oxford: questions
Can you survey in Oxford and nearby towns?
Yes. Surveys in Oxford, Abingdon and Didcot are booked around installer availability.
Can film go on double glazing?
Often, but not always. Some units and coated glass can crack from heat build-up with certain films, so we check the glass type and the unit maker's guidance before fitting.
Can film be used on listed buildings?
Film is fitted inside and can be removed, so it is often an acceptable way to protect historic glass. Check with the council's conservation officer for listed buildings.
Does security film make glass as strong as laminated glass?
Not usually. Film greatly improves how glass breaks and slows an attack, but it only matches a laminated glass class where that film and glass combination has been tested together.
Security window film in nearby towns
Other glazing in Oxford
- Broken glass replacement
- Security double-glazed units
- Security secondary glazing
- Kiosk and booth security glazing
- Patio and bifold door security glass
- Counter and reception security screens
Start with a guide price online, then we survey and fix the price in writing.