What should security window film cost in Bootle?
Typical prices for security window film in Bootle are £54 to £132 including VAT (£45 to £110 plus VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.
Security window film is a clear, tough polyester film bonded to the inside face of existing glass with a strong adhesive. When the glass breaks, the film holds the fragments together, which reduces injury from flying glass and slows down anyone trying to get through, without replacing the glass itself.
Specification at a glance
- Thermal-stress check on sealed units and coated glass
- Fitted on site without removing the glass
- Blocks most UV light to slow fading
- Frosted and privacy versions for meeting rooms and bathrooms
- Security films of 200 microns and thicker
- Clear safety films from about 100 microns
Fitting in Bootle and nearby
Whether you are in central Bootle or at the edge of the L20 district, we can arrange a survey. Nearby Litherland and Wallasey are covered too.
Merseyside has Liverpool's listed commercial centre and waterfront offices, Victorian terraces across the city and the Wirral, and suburban high streets in Southport and St Helens.
Good candidates for security window film:
- Existing shop windows that are not due for replacement
- Listed buildings where original glass must stay
- Large areas of glazing on a tight budget
- School and office glazing in low-level positions
Before the glass is ordered
Film or new glass
Where frames are being replaced or very high resistance is needed, laminated glass usually gives better value over its life than film.
Is the glass suitable
Some double-glazed units and coated or tinted glass can suffer heat stress with certain films. We check the glass and the unit maker's guidance first.
Glazing rules in England
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
Replacing glass in an existing frame
Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.
How it works
- Postcode and a few photos
- On-site survey
- Fixed written price and lead time
- Fit, check and explain
Security window film in Bootle: questions
Do you cover Litherland as well as Bootle?
Yes. As well as Bootle, we can arrange surveys in nearby Litherland, Wallasey and Liverpool. Dates depend on installer availability.
Can film be used on listed buildings?
Film is fitted inside and can be removed, so it is often an acceptable way to protect historic glass. Check with the council's conservation officer for listed buildings.
Can I still see through security film?
Yes. Security films are optically clear. Frosted and tinted versions are available where privacy or glare control is wanted.
Does security film make glass as strong as laminated glass?
Not usually. Film greatly improves how glass breaks and slows an attack, but it only matches a laminated glass class where that film and glass combination has been tested together.
Security window film in nearby towns
Other glazing in Bootle
- Blast-resistant glazing
- Laminated roof and conservatory glass
- Glazing bead security upgrades
- Broken glass replacement
- Toughened safety glass
- Shopfront security glass
Start with a guide price online, then we survey and fix the price in writing.