How much should I budget for security window film in Rochester?
Guide prices for security window film in Rochester are £54 to £132 including VAT (£45 to £110 plus VAT) per m² for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.
Security window film is a clear, tough polyester film bonded to the inside face of existing glass with a strong adhesive. When the glass breaks, the film holds the fragments together, which reduces injury from flying glass and slows down anyone trying to get through, without replacing the glass itself.
What you can specify
- Security films of 200 microns and thicker
- Fitted on site without removing the glass
- Clear safety films from about 100 microns
- Edge-retention anchoring into the frame for blast mitigation
- Frosted and privacy versions for meeting rooms and bathrooms
- Blocks most UV light to slow fading
Fitting in Rochester and nearby
We arrange surveys and fitting in Rochester and across the ME1 postcode district, as well as in nearby Chatham (1 mile) and Strood (1 mile). Dates depend on installer availability.
Kent ranges from Canterbury's listed city centre and the Regency fronts of Tunbridge Wells to the Medway towns, Ashford's growth estates and coastal Margate and Folkestone.
Common uses:
- Listed buildings where original glass must stay
- Existing shop windows that are not due for replacement
- School and office glazing in low-level positions
- Large areas of glazing on a tight budget
What to think about first
Safety or security film
Thinner films improve how glass breaks; thicker films add resistance to attack. We match the film to what you want it to do.
Daylight application or anchored
A film applied to the visible glass is quickest. Anchoring it to the frame holds the whole pane in place and is the choice for blast mitigation.
Consents and safety: England
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.
How it works
- Send sizes or use the quote tool
- Free survey at your Rochester address
- Fixed price in writing
- Glass made, then fitted
Security window film in Rochester: questions
Do you cover Chatham as well as Rochester?
Yes. As well as Rochester, we can arrange surveys in nearby Chatham, Strood and Gillingham. Dates depend on installer availability.
Can film go on double glazing?
Often, but not always. Some units and coated glass can crack from heat build-up with certain films, so we check the glass type and the unit maker's guidance before fitting.
Can film be used on listed buildings?
Film is fitted inside and can be removed, so it is often an acceptable way to protect historic glass. Check with the council's conservation officer for listed buildings.
Does security film make glass as strong as laminated glass?
Not usually. Film greatly improves how glass breaks and slows an attack, but it only matches a laminated glass class where that film and glass combination has been tested together.
Security window film in nearby towns
Other glazing in Rochester
- Anti-bandit glass
- Broken glass replacement
- Blast-resistant glazing
- Security glass for home windows
- Laminated security glass
- Commercial reglazing
Ready for a price? Use the form or call 0800 088 6248.