What should security window film cost in Ashford, Kent?
Budget £54 to £132 including VAT (£45 to £110 plus VAT) per m² for security window film in Ashford, Kent, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.
Security window film is a clear, tough polyester film bonded to the inside face of existing glass with a strong adhesive. When the glass breaks, the film holds the fragments together, which reduces injury from flying glass and slows down anyone trying to get through, without replacing the glass itself.
What you can specify
- Security films of 200 microns and thicker
- Clear safety films from about 100 microns
- Blocks most UV light to slow fading
- Edge-retention anchoring into the frame for blast mitigation
- Thermal-stress check on sealed units and coated glass
- Fitted on site without removing the glass
Fitting in Ashford, Kent and nearby
We arrange surveys and fitting in Ashford, Kent and across the TN24 postcode district, as well as in nearby Faversham (12 miles) and Canterbury (13 miles). Dates depend on installer availability.
Kent ranges from Canterbury's listed city centre and the Regency fronts of Tunbridge Wells to the Medway towns, Ashford's growth estates and coastal Margate and Folkestone.
Good candidates for security window film:
- Offices wanting flying-glass protection
- Large areas of glazing on a tight budget
- Listed buildings where original glass must stay
- School and office glazing in low-level positions
Before the glass is ordered
Is the glass suitable
Some double-glazed units and coated or tinted glass can suffer heat stress with certain films. We check the glass and the unit maker's guidance first.
Film or new glass
Where frames are being replaced or very high resistance is needed, laminated glass usually gives better value over its life than film.
Glazing rules in England
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
Replacing glass in an existing frame
Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.
How it works
- Send sizes or use the quote tool
- Free survey at your Ashford, Kent address
- Fixed price in writing
- Glass made, then fitted
Security window film in Ashford, Kent: questions
Do you cover Faversham as well as Ashford, Kent?
Yes. As well as Ashford, Kent, we can arrange surveys in nearby Faversham, Canterbury and Folkestone. Dates depend on installer availability.
Can I still see through security film?
Yes. Security films are optically clear. Frosted and tinted versions are available where privacy or glare control is wanted.
Can film go on double glazing?
Often, but not always. Some units and coated glass can crack from heat build-up with certain films, so we check the glass type and the unit maker's guidance before fitting.
Can film be used on listed buildings?
Film is fitted inside and can be removed, so it is often an acceptable way to protect historic glass. Check with the council's conservation officer for listed buildings.
Security window film in nearby towns
- Faversham12 miles
- Canterbury13 miles
- Folkestone13 miles
- Sittingbourne15 miles
- Whitstable16 miles
- Maidstone18 miles
Other glazing in Ashford, Kent
- Security glass for doors
- Glazing bead security upgrades
- Commercial reglazing
- Anti-bandit glass
- Security glass for home windows
- Bullet-resistant glass
Ready for a price? Use the form or call 0800 088 6248.