How much does security window film cost in Plymouth?
Our guide range for security window film is £54 to £132 including VAT (£45 to £110 plus VAT) per m², supplied and fitted. Work in Plymouth is arranged individually, so travel and glass delivery are confirmed in your written price before anything is booked.
Security window film is a clear, tough polyester film bonded to the inside face of existing glass with a strong adhesive. When the glass breaks, the film holds the fragments together, which reduces injury from flying glass and slows down anyone trying to get through, without replacing the glass itself.
Specification at a glance
- Thermal-stress check on sealed units and coated glass
- Clear safety films from about 100 microns
- Edge-retention anchoring into the frame for blast mitigation
- Removable later without harming the glass
- Frosted and privacy versions for meeting rooms and bathrooms
- Fitted on site without removing the glass
Fitting in Plymouth
Surveys and fitting in Plymouth are arranged case by case because of travel and glass delivery. Tell us about the job and we will come back with options.
Devon spans Exeter's Georgian and post-war centre, Plymouth's rebuilt 1950s shopping streets and waterfront offices, and seaside towns where sea air is hard on window frames and seals.
Typical places for security window film:
- Large areas of glazing on a tight budget
- Existing shop windows that are not due for replacement
- Listed buildings where original glass must stay
- Offices wanting flying-glass protection
Things to decide before you order
Safety or security film
Thinner films improve how glass breaks; thicker films add resistance to attack. We match the film to what you want it to do.
Film or new glass
Where frames are being replaced or very high resistance is needed, laminated glass usually gives better value over its life than film.
Rules that apply in England
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
Replacing glass in an existing frame
Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.
How it works
- Send sizes, photos and your postcode
- We confirm what is possible and when
- Fixed price in writing
- Glass made, delivered and fitted
Security window film in Plymouth: questions
Can you work in Plymouth?
Work in Plymouth is arranged individually because of travel. Send your postcode and details and we will confirm what is possible.
Can film be used on listed buildings?
Film is fitted inside and can be removed, so it is often an acceptable way to protect historic glass. Check with the council's conservation officer for listed buildings.
Can film go on double glazing?
Often, but not always. Some units and coated glass can crack from heat build-up with certain films, so we check the glass type and the unit maker's guidance before fitting.
Can I still see through security film?
Yes. Security films are optically clear. Frosted and tinted versions are available where privacy or glare control is wanted.
Other glazing in Plymouth
- Security double-glazed units
- Blast-resistant glazing
- Security secondary glazing
- Security glass for home windows
- Shopfront security glass
- Laminated security glass
Send sizes and photos with the form, or call 0800 088 6248.