Security film in Cambridge | From £54/m², Min. £354 inc VAT

Security window film in Cambridge: what will it cost?

As a guide, allow £54 to £132 including VAT (£45 to £110 plus VAT) per m² for security window film in Cambridge, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Security window film is a clear, tough polyester film bonded to the inside face of existing glass with a strong adhesive. When the glass breaks, the film holds the fragments together, which reduces injury from flying glass and slows down anyone trying to get through, without replacing the glass itself.

Specification at a glance

Frosted and privacy versions for meeting rooms and bathrooms
Removable later without harming the glass
Fitted on site without removing the glass
Edge-retention anchoring into the frame for blast mitigation
Security films of 200 microns and thicker
Clear safety films from about 100 microns

Fitting in Cambridge and nearby

Whether you are in central Cambridge or at the edge of the CB1 district, we can arrange a survey. Nearby Newmarket and Huntingdon are covered too.

Cambridgeshire has listed college streets and shopfronts in Cambridge and Ely, Peterborough's Victorian terraces and modern retail, and science-park offices with large glazed facades.

Typical settings for security window film:

Existing shop windows that are not due for replacement
School and office glazing in low-level positions
Offices wanting flying-glass protection
Large areas of glazing on a tight budget

Getting the right glass for your building

Daylight application or anchored

A film applied to the visible glass is quickest. Anchoring it to the frame holds the whole pane in place and is the choice for blast mitigation.

Film or new glass

Where frames are being replaced or very high resistance is needed, laminated glass usually gives better value over its life than film.

What the rules say in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Security window film in Cambridge: questions

Do you cover Newmarket as well as Cambridge?

Yes. As well as Cambridge, we can arrange surveys in nearby Newmarket, Huntingdon and Haverhill. Dates depend on installer availability.

Can I still see through security film?

Yes. Security films are optically clear. Frosted and tinted versions are available where privacy or glare control is wanted.

Can film be used on listed buildings?

Film is fitted inside and can be removed, so it is often an acceptable way to protect historic glass. Check with the council's conservation officer for listed buildings.

Can film go on double glazing?

Often, but not always. Some units and coated glass can crack from heat build-up with certain films, so we check the glass type and the unit maker's guidance before fitting.

Security window film in nearby towns

Other glazing in Cambridge

Start with a guide price online, then we survey and fix the price in writing.

Security window film in Cambridge

Free quote in Cambridge