Security double-glazed units in Clevedon

How much should I budget for security double-glazed units in Clevedon?

Typical prices for security double-glazed units in Clevedon are £174 to £594 including VAT (£145 to £495 plus VAT) per unit, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.

Glass and fitting options

Laminated inner pane, outer pane or both
Obscure and decorative glass for bathrooms and doors
24 mm, 28 mm and other overall thicknesses to suit frames
Made to measure for each sash, light and door panel
Toughened outer pane where safety glass is required
Warm-edge spacer bars in black, grey or white

Fitting in Clevedon and nearby

From the BS21 district we also cover Nailsea (4 miles) and Portishead (5 miles). Survey dates depend on installer availability.

Somerset's glazing runs from the Georgian sashes of Bath, a World Heritage city, to the town-centre shops of Taunton and Yeovil and the seafront at Weston-super-Mare.

Common uses:

Patio doors and bifolds
Glazed back and side doors
Ground-floor and basement windows
Windows in flats on walkways and balconies

What to think about first

Overall thickness

The new unit must suit the frame's glazing rebate. If your frames only take thin units, we use thinner laminates or adjust the beads.

Internal or external beads

If your beads are on the outside, we add security tape or clips so the unit cannot be lifted out after the beads are removed.

Consents and safety: England

England

Security rules for new homes

Approved Document Q has applied to new homes in England since 1 October 2015. Easily accessible doors and windows, meaning any part within 2 m vertically of the ground or another accessible surface, should meet PAS 24 or an equivalent, and glazing in doors and in windows within 400 mm of a door should be laminated to at least BS EN 356 P1A. It does not apply when you change the glass in an existing home, although it is a sensible benchmark.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Security double-glazed units in Clevedon: questions

Can you survey in Clevedon and nearby towns?

Yes. Surveys in Clevedon, Nailsea and Portishead are booked around installer availability.

Which pane should be laminated?

Usually the inner pane, so smashing the outer pane does not create an opening. On doors and low panes the outer pane is normally toughened to meet safety rules.

Will a laminated unit be heavier?

A little. A laminated pane weighs about the same as a solid sheet of the same thickness. On large opening sashes we check hinges and friction stays.

How long do new units take?

Units are made to order after the survey. Lead times vary with glass type and size, and we confirm them when we quote.

Security double-glazed units in nearby towns

Other glazing in Clevedon

Get a guide price now and book your free survey in Clevedon.