Security double-glazed units in Telford

Security double-glazed units in Telford: what will it cost?

Expect £174 to £594 including VAT (£145 to £495 plus VAT) per unit for security double-glazed units in Telford. The written quote names the glass makeup, the price and the lead time before you commit.

A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.

Glass and fitting options

Laminated inner pane, outer pane or both
24 mm, 28 mm and other overall thicknesses to suit frames
Obscure and decorative glass for bathrooms and doors
Security glazing tape or clips where beads are external
Warm-edge spacer bars in black, grey or white
Toughened outer pane where safety glass is required

Fitting in Telford and nearby

Surveys in Telford (TF3) are booked around installer availability, as they are in nearby Wellington (3 miles) and Bridgnorth (10 miles).

Shropshire combines Shrewsbury's timber-framed and Georgian centre with Telford's modern town centre, business parks and estates, and hill-country towns such as Ludlow and Bridgnorth.

Typical settings for security double-glazed units:

Glazed back and side doors
Replacing misted or damaged units
Ground-floor and basement windows
Windows in flats on walkways and balconies

Getting the right glass for your building

Internal or external beads

If your beads are on the outside, we add security tape or clips so the unit cannot be lifted out after the beads are removed.

Overall thickness

The new unit must suit the frame's glazing rebate. If your frames only take thin units, we use thinner laminates or adjust the beads.

What the rules say in England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover