Security double-glazed units in Selby

How much do security double-glazed units cost in Selby?

Our guide range for security double-glazed units in Selby is £174 to £594 including VAT (£145 to £495 plus VAT) per unit, including fitting. The survey is free for new installations and your fixed price follows in writing.

A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.

Glass and fitting options

Toughened outer pane where safety glass is required
Laminated inner pane, outer pane or both
24 mm, 28 mm and other overall thicknesses to suit frames
Warm-edge spacer bars in black, grey or white
Made to measure for each sash, light and door panel
Low-E coating and argon fill for insulation

Fitting in Selby and nearby

From the YO8 district we also cover Goole (10 miles) and Pontefract (12 miles). Survey dates depend on installer availability.

North Yorkshire includes York's walled city and listed streets, Harrogate's Victorian stone terraces, Middlesbrough's town centre and coastal Scarborough and Whitby.

Typical places for security double-glazed units:

Windows in flats on walkways and balconies
Replacing misted or damaged units
Patio doors and bifolds
Ground-floor and basement windows

Things to decide before you order

Which pane is laminated

Laminating the inner pane is the usual security choice. Laminating both panes adds protection on high-risk elevations.

Energy performance

Choosing low-E glass, argon and warm-edge spacers keeps the window as efficient as possible, often better than the unit being replaced.

Rules that apply in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover