Security double-glazed units in Hythe

How much do security double-glazed units cost in Hythe?

As a guide, allow £174 to £594 including VAT (£145 to £495 plus VAT) per unit for security double-glazed units in Hythe, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.

Glass and fitting options

24 mm, 28 mm and other overall thicknesses to suit frames
Laminated inner pane, outer pane or both
Toughened outer pane where safety glass is required
Low-E coating and argon fill for insulation
Warm-edge spacer bars in black, grey or white
Made to measure for each sash, light and door panel

Fitting in Hythe and nearby

From the SO45 district we also cover Southampton (3 miles) and Totton (6 miles). Survey dates depend on installer availability.

Hampshire covers the port-city shops and offices of Southampton and Portsmouth, Winchester's listed centre, and commuter estates around Basingstoke, Eastleigh and Fareham.

Typical places for security double-glazed units:

Ground-floor and basement windows
Replacing misted or damaged units
Glazed back and side doors
Windows in flats on walkways and balconies

Things to decide before you order

Energy performance

Choosing low-E glass, argon and warm-edge spacers keeps the window as efficient as possible, often better than the unit being replaced.

Internal or external beads

If your beads are on the outside, we add security tape or clips so the unit cannot be lifted out after the beads are removed.

Rules that apply in England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover