Security double-glazed units in Barking

How much do security double-glazed units cost in Barking?

Expect £174 to £594 including VAT (£145 to £495 plus VAT) per unit for security double-glazed units in Barking. The written quote names the glass makeup, the price and the lead time before you commit.

A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.

What goes into security double-glazed units

Made to measure for each sash, light and door panel
24 mm, 28 mm and other overall thicknesses to suit frames
Low-E coating and argon fill for insulation
Toughened outer pane where safety glass is required
Laminated inner pane, outer pane or both
Security glazing tape or clips where beads are external

Fitting in Barking and nearby

Surveys in Barking (IG11) are booked around installer availability. We also cover nearby Ilford (2 miles), Becontree (2 miles) and Thamesmead (3 miles).

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

Typical places for security double-glazed units:

Replacing misted or damaged units
Ground-floor and basement windows
Windows in flats on walkways and balconies
Glazed back and side doors

Things to decide before you order

Overall thickness

The new unit must suit the frame's glazing rebate. If your frames only take thin units, we use thinner laminates or adjust the beads.

Internal or external beads

If your beads are on the outside, we add security tape or clips so the unit cannot be lifted out after the beads are removed.

Rules that apply in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Security rules for new homes

Approved Document Q has applied to new homes in England since 1 October 2015. Easily accessible doors and windows, meaning any part within 2 m vertically of the ground or another accessible surface, should meet PAS 24 or an equivalent, and glazing in doors and in windows within 400 mm of a door should be laminated to at least BS EN 356 P1A. It does not apply when you change the glass in an existing home, although it is a sensible benchmark.

How it works

Send sizes or use the quote tool
Free survey at your Barking address
Fixed price in writing
Glass made, then fitted