How much do security double-glazed units cost in Mold?
Our guide range for security double-glazed units in Mold is £174 to £594 including VAT (£145 to £495 plus VAT) per unit, including fitting. The survey is free for new installations and your fixed price follows in writing.
A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.
Glass and fitting options
- Obscure and decorative glass for bathrooms and doors
- Warm-edge spacer bars in black, grey or white
- Laminated inner pane, outer pane or both
- Security glazing tape or clips where beads are external
- 24 mm, 28 mm and other overall thicknesses to suit frames
- Toughened outer pane where safety glass is required
Fitting in Mold and nearby
From the CH7 district we also cover Buckley (2 miles) and Deeside (5 miles). Survey dates depend on installer availability.
Clwyd takes in Wrexham's town centre and industrial estates, Deeside's business parks, Victorian seaside towns such as Rhyl and Colwyn Bay, and stone market towns like Ruthin and Denbigh.
Typical places for security double-glazed units:
- Patio doors and bifolds
- Replacing misted or damaged units
- Ground-floor and basement windows
- Windows in flats on walkways and balconies
Things to decide before you order
Energy performance
Choosing low-E glass, argon and warm-edge spacers keeps the window as efficient as possible, often better than the unit being replaced.
Overall thickness
The new unit must suit the frame's glazing rebate. If your frames only take thin units, we use thinner laminates or adjust the beads.
Rules that apply in Wales
Security rules for new homes
Wales introduced its own Approved Document Q for new homes, in force from 1 November 2018, and it applies to newly erected dwellings only. It follows a similar approach to England's, with PAS 24 referenced for easily accessible doors and windows and laminated glass to BS EN 356 P1A in doors and nearby windows. It does not apply to changing the glass in an existing home.
Safety glass in critical locations
In Wales, safety glazing is covered by Approved Document N (glazing) under the Welsh Building Regulations rather than Approved Document K. Glass in doors up to 1,500 mm above the floor, in panes within 300 mm of a door up to 1,500 mm, and in other glazing below 800 mm should be safety glass or protected. Laminated and toughened glass are the usual choices.
How it works
- Postcode and a few photos
- On-site survey
- Fixed written price and lead time
- Fit, check and explain
Security double-glazed units in Mold: questions
Can you survey in Mold and nearby towns?
Yes. Surveys in Mold, Buckley and Deeside are booked around installer availability.
Which pane should be laminated?
Usually the inner pane, so smashing the outer pane does not create an opening. On doors and low panes the outer pane is normally toughened to meet safety rules.
How long do new units take?
Units are made to order after the survey. Lead times vary with glass type and size, and we confirm them when we quote.
Will a laminated unit be heavier?
A little. A laminated pane weighs about the same as a solid sheet of the same thickness. On large opening sashes we check hinges and friction stays.
Security double-glazed units in nearby towns
Other glazing in Mold
- Shopfront security glass
- Security glazed doors and screens
- Blast-resistant glazing
- Security secondary glazing
- Anti-ram-raid glazing
- Patio and bifold door security glass
Start with a guide price online, then we survey and fix the price in writing.