Security double-glazed units in Macclesfield

What is the price of security double-glazed units in Macclesfield?

Budget £174 to £594 including VAT (£145 to £495 plus VAT) per unit for security double-glazed units in Macclesfield, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.

What goes into security double-glazed units

Warm-edge spacer bars in black, grey or white
Security glazing tape or clips where beads are external
Made to measure for each sash, light and door panel
Low-E coating and argon fill for insulation
Toughened outer pane where safety glass is required
Laminated inner pane, outer pane or both

Fitting in Macclesfield and nearby

Surveys in Macclesfield (SK11) are booked around installer availability. We also cover nearby Wilmslow (6 miles), Congleton (8 miles) and Cheadle Hulme (8 miles).

Cheshire mixes Chester's Rows and listed black-and-white frontages with Victorian terraces in Crewe and Macclesfield, and business parks and newer estates around Warrington.

This glazing suits:

Windows in flats on walkways and balconies
Patio doors and bifolds
Ground-floor and basement windows
Replacing misted or damaged units

Questions we will ask at the survey

Which pane is laminated

Laminating the inner pane is the usual security choice. Laminating both panes adds protection on high-risk elevations.

Internal or external beads

If your beads are on the outside, we add security tape or clips so the unit cannot be lifted out after the beads are removed.

Building regulations and safety in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Guide price online or by phone
Survey in Macclesfield
Accept the fixed quote
Fitted by glaziers working under our contract

Security double-glazed units in Macclesfield: questions

Can you survey in Macclesfield and nearby towns?

Yes. Surveys in Macclesfield, Wilmslow and Congleton are booked around installer availability.

Can I just replace the glass and keep my frames?

Yes, if the frames are sound. We measure each unit, make security units to the same size and fit them into your existing frames.

Which pane should be laminated?

Usually the inner pane, so smashing the outer pane does not create an opening. On doors and low panes the outer pane is normally toughened to meet safety rules.

How long do new units take?

Units are made to order after the survey. Lead times vary with glass type and size, and we confirm them when we quote.

Security double-glazed units in nearby towns

Other glazing in Macclesfield

Tell us about the glazing and we will come back with a guide price.