Security double-glazed units in Reading

Security double-glazed units in Reading: what will it cost?

As a guide, allow £174 to £594 including VAT (£145 to £495 plus VAT) per unit for security double-glazed units in Reading, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.

What you can specify

Made to measure for each sash, light and door panel
Low-E coating and argon fill for insulation
Toughened outer pane where safety glass is required
24 mm, 28 mm and other overall thicknesses to suit frames
Obscure and decorative glass for bathrooms and doors
Security glazing tape or clips where beads are external

Fitting in Reading and nearby

We arrange surveys and fitting across Reading and the RG1 postcode district, and in nearby Wokingham (7 miles), Crowthorne (10 miles) and Yateley.

Berkshire pairs the glass-fronted offices of Reading, Slough and Bracknell with Victorian and Edwardian housing and listed riverside buildings in Windsor and Eton.

Typical settings for security double-glazed units:

Ground-floor and basement windows
Windows in flats on walkways and balconies
Patio doors and bifolds
Replacing misted or damaged units

Getting the right glass for your building

Overall thickness

The new unit must suit the frame's glazing rebate. If your frames only take thin units, we use thinner laminates or adjust the beads.

Internal or external beads

If your beads are on the outside, we add security tape or clips so the unit cannot be lifted out after the beads are removed.

What the rules say in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Guide price online or by phone
Survey in Reading
Accept the fixed quote
Fitted by glaziers working under our contract