What is the price of safety glazing for schools and public buildings in Dover?
Our guide range for safety glazing for schools and public buildings in Dover is £95 to £345 plus VAT (£114 to £414 inc VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.
Safety glazing for schools and public buildings means finding glass in critical locations, such as doors, side panels and low-level panes, that would break dangerously, and replacing it with toughened or laminated safety glass or protecting it with safety film. It helps duty holders meet workplace and building safety rules where children, staff and visitors move around.
What goes into safety glazing for schools and public buildings
- Laminated glass for vision panels and corridors
- Work in holidays and outside hours
- Clear records for your estate files
- Safety film for glass that can stay
- Pane-by-pane survey and schedule of critical locations
- Fire-rated glass for fire doors and screens, using the glazing system named in the door's certification
Fitting in Dover and nearby
Surveys in Dover (CT16) are booked around installer availability. We also cover nearby Folkestone (7 miles), Deal (8 miles) and Canterbury (15 miles).
Kent ranges from Canterbury's listed city centre and the Regency fronts of Tunbridge Wells to the Medway towns, Ashford's growth estates and coastal Margate and Folkestone.
This glazing suits:
- Colleges and community halls
- Primary and secondary schools
- Offices with older internal glazing
- Nurseries and early-years settings
Questions we will ask at the survey
Manifestation
Large clear panes need markings at eye level so people do not walk into them.
Prioritising
Start with doors, side panels and low-level glass in busy areas, then work outwards. The schedule makes it easy to phase.
Building regulations and safety in England
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
Fire-rated glass is different
Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.
How it works
- Send sizes or use the quote tool
- Free survey at your Dover address
- Fixed price in writing
- Glass made, then fitted
Safety glazing for schools and public buildings in Dover: questions
Can you survey in Dover and nearby towns?
Yes. Surveys in Dover, Folkestone and Deal are booked around installer availability.
Is wired glass safety glass?
Not usually. Ordinary wired glass is not a safety glass and can break into sharp pieces in impact positions. Some wired glass is used for fire resistance, which is a different job.
Can you work during school holidays?
Yes. Most school glazing work is planned for holidays, weekends or after hours.
Can you replace glass in fire doors?
Often, yes, using the fire-rated glass and glazing system named in the door's certification or test evidence; some doors need a certificated fire-door installer, which we check first. Fire door glass must never be replaced with ordinary safety or security glass.
Safety glazing for schools and public buildings in nearby towns
Other glazing in Dover
- Bullet-resistant glass
- Toughened safety glass
- Anti-bandit glass
- Security glass for doors
- Glazing bead security upgrades
- Commercial reglazing
Ready for a price? Use the form or call 0800 088 6248.