Safety glazing for schools and public buildings in Bristol

How much does safety glazing for schools and public buildings cost in Bristol?

Our guide range for safety glazing for schools and public buildings in Bristol is £95 to £345 plus VAT (£114 to £414 inc VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.

Safety glazing for schools and public buildings means finding glass in critical locations, such as doors, side panels and low-level panes, that would break dangerously, and replacing it with toughened or laminated safety glass or protecting it with safety film. It helps duty holders meet workplace and building safety rules where children, staff and visitors move around.

Glass and fitting options

Toughened and laminated replacement glass
Laminated glass for vision panels and corridors
Fire-rated glass for fire doors and screens, using the glazing system named in the door's certification
Work in holidays and outside hours
Clear records for your estate files
Safety film for glass that can stay

Covering Bristol

We can arrange surveys and fitting anywhere in Bristol, including Clifton and Bedminster. Dates depend on installer availability.

Bristol's glazing ranges from Georgian sash windows in Clifton and Kingsdown to Victorian bay fronts in Bedminster and modern glazed offices around Temple Quarter and the harbourside.

Typical places for safety glazing for schools and public buildings:

Offices with older internal glazing
Primary and secondary schools
Colleges and community halls
Libraries, leisure centres and council buildings

Things to decide before you order

Prioritising

Start with doors, side panels and low-level glass in busy areas, then work outwards. The schedule makes it easy to phase.

Manifestation

Large clear panes need markings at eye level so people do not walk into them.

Rules that apply in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Safety glazing for schools and public buildings in Bristol: questions

Which parts in Bristol do you cover?

We can arrange work anywhere in Bristol, including Clifton, Bedminster, Easton, Fishponds and Southville.

Is wired glass safety glass?

Not usually. Ordinary wired glass is not a safety glass and can break into sharp pieces in impact positions. Some wired glass is used for fire resistance, which is a different job.

Can you replace glass in fire doors?

Often, yes, using the fire-rated glass and glazing system named in the door's certification or test evidence; some doors need a certificated fire-door installer, which we check first. Fire door glass must never be replaced with ordinary safety or security glass.

Can you work during school holidays?

Yes. Most school glazing work is planned for holidays, weekends or after hours.

Other glazing in Bristol

Get a guide price now and book your free survey in Bristol.