Security glass for home windows in Tyne and Wear

How much should I budget for security glass for home windows in Tyne and Wear?

Our guide range for security glass for home windows in Tyne and Wear is £162 to £474 including VAT (£135 to £395 plus VAT) per window, including fitting. The survey is free for new installations and your fixed price follows in writing.

Security glass for home windows means replacing the glass in your existing frames with laminated glass or sealed units that have a laminated pane. The windows look and open exactly as before, but breaking the glass becomes a slow, noisy job rather than a quick way into the house.

What goes into security glass for home windows

Low-E glass and argon to keep rooms warm
Toughened outer pane where safety glass is required
Same overall thickness as your current units where possible
Obscure glass for bathrooms and landings
Laminated inner pane in new sealed units
Frames, handles and locks left in place

Covering Tyne and Wear

We can arrange surveys and fitting anywhere in Tyne and Wear, including Newcastle upon Tyne and Sunderland. Dates depend on installer availability. Choose your town below for local details.

Tyne and Wear covers Newcastle's Grainger Town stone streets and quayside offices, the town centres of Sunderland and Gateshead, and large inter-war and post-war housing estates.

Common uses:

Windows beside flat roofs, porches and extensions
Flats on walkways and balconies
Basement and lower-ground windows
Ground-floor windows at the back of the house

Towns in Tyne and Wear

What to think about first

Keep or replace frames

If the frames are sound, new glass is the cheaper upgrade. If they are failing, we will tell you so you can compare with new windows.

Beads inside or out

Externally beaded windows can have the glass removed from outside. We fit security tape or clips so that route is closed.

Consents and safety: England

England

Security rules for new homes

Approved Document Q has applied to new homes in England since 1 October 2015. Easily accessible doors and windows, meaning any part within 2 m vertically of the ground or another accessible surface, should meet PAS 24 or an equivalent, and glazing in doors and in windows within 400 mm of a door should be laminated to at least BS EN 356 P1A. It does not apply when you change the glass in an existing home, although it is a sensible benchmark.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Guide price online or by phone
Survey in Tyne and Wear
Accept the fixed quote
Fitted by glaziers working under our contract

Security glass for home windows in Tyne and Wear: questions

Which towns in Tyne and Wear do you cover?

We can arrange work anywhere in Tyne and Wear, including Newcastle upon Tyne, Sunderland, South Shields, Gateshead and Washington, and in other towns across the area.

Can you match my obscure bathroom glass?

We can usually match common obscure patterns, or fit a laminated obscure glass with a similar look.

Which windows do burglars target?

Mostly ground-floor windows at the back and side, and windows that can be reached from flat roofs or walls. Those are the ones we suggest upgrading first.

Does replacing the glass need building regulations approval?

Replacing glass in an existing frame is generally treated as a repair. Replacing whole windows is controlled work: notifiable in England and Wales, and in Scotland and Northern Ireland the council's building control can say whether approval is needed. New glass in a critical location should still be safety glass.

Other glazing in Tyne and Wear

Tell us about the glazing and we will come back with a guide price.