Glazing bead security upgrades in Rochester: what will it cost?
Allow £54 to £114 including VAT (£45 to £95 plus VAT) per window for glazing bead security upgrades in Rochester, with a minimum charge of £174 including VAT (£145 plus VAT) per visit. The price is confirmed before we attend.
A glazing bead security upgrade makes the glass much harder to remove from the outside of a window or door. On frames with external beads, a burglar can sometimes prise off the beads and lift the whole unit out quietly, and bonding the glass with security tape or fitting bead clips makes that route much harder.
Work we can carry out
- Can be combined with laminated units
- No change to how the window looks
- Concealed fixings for aluminium beads
- Double-sided security glazing tape between unit and frame
- Suitable for windows and glazed doors
- Beads replaced where cracked or brittle
Visits in Rochester and nearby
We can arrange glazing bead security upgrades anywhere in Rochester, and in nearby Chatham, Strood and Gillingham. Tell us your postcode and we will offer dates.
Kent ranges from Canterbury's listed city centre and the Regency fronts of Tunbridge Wells to the Medway towns, Ashford's growth estates and coastal Margate and Folkestone.
Common situations:
- Older uPVC windows with beads on the outside
- Rented homes where frames are staying
- Glazed doors with external beads
- Ground-floor and back windows
Getting the best result
Glass at the same time
If units are misted or due for replacement, it is cheaper to fit laminated units and tape in one visit.
Brittle beads
Old beads can crack when removed. We bring replacements so they can be renewed rather than refitted damaged.
What the rules say in England
Replacing glass in an existing frame
Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
How it works
- Send a photo of the bead side
- Visit price agreed
- Clips, tape or internal beads fitted
- Record of anything else we noticed
Glazing bead security upgrades in Rochester: questions
Can you visit addresses near Rochester?
We can arrange work in Rochester and in nearby Chatham (1 mile), Strood (1 mile) and Gillingham (2 miles). Dates depend on installer availability.
How do I know if my beads are on the outside?
Look at the glass from outside. If you can see a separate clip-in strip around the edge of the glass, and the frame inside is plain, the beads are external.
Does the glass have to come out to fit security tape?
Yes. Each unit is removed, the tape is applied to the frame and the unit is refitted, so it is a good moment to swap in laminated glass if wanted.
Can you do this on aluminium windows?
Often, depending on the bead design. We check the profile when we confirm the price.
Glazing bead security upgrades in nearby towns
Other glazing in Rochester
- Safety glazing for schools and public buildings
- Security glass for home windows
- Counter and reception security screens
- Security double-glazed units
- Anti-ram-raid glazing
- Misted unit replacement with laminated glass
Send a photo and we will come back with a price.