Security glass for doors in Tonbridge

What should security glass for doors cost in Tonbridge?

Typical prices for security glass for doors in Tonbridge are £150 to £510 including VAT (£125 to £425 plus VAT) per door, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Security glass for doors replaces the glazed panel in a front, back or side door with laminated safety glass, usually in a sealed unit with a toughened outer pane. It stops the common trick of breaking the glass to reach in and turn a key or thumb-turn left in the lock.

Choices you can make

Laminated backing for leaded and bevelled panels
Glass for side panels and fanlights beside the door
Clear, obscure and decorative designs
Laminated inner pane with toughened outer pane
Composite door cassettes where available
Internal beads or security tape so glass is much harder to remove from outside

Fitting in Tonbridge and nearby

We can arrange security glass for doors anywhere in Tonbridge, and in nearby Tunbridge Wells, Sevenoaks and Crowborough. Tell us your postcode and we will offer dates.

Kent ranges from Canterbury's listed city centre and the Regency fronts of Tunbridge Wells to the Medway towns, Ashford's growth estates and coastal Margate and Folkestone.

Good candidates for security glass for doors:

Doors with a thumb-turn lock near the glass
Back and side doors with a large glazed panel
Front doors with glazed side panels
Flat entrance doors with vision panels

Before the glass is ordered

Side panels too

Side panels within 300 mm of the door are critical locations as well, and a weak side panel is an easy way in. We usually do both together.

Keep the design

Most decorative glass can be copied or rebuilt with a laminated backing pane, so the door looks the same.

Glazing rules in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Send sizes or use the quote tool
Free survey at your Tonbridge address
Fixed price in writing
Glass made, then fitted

Security glass for doors in Tonbridge: questions

Which areas near Tonbridge do you cover?

We can arrange work in Tonbridge and in nearby Tunbridge Wells (4 miles), Sevenoaks (6 miles) and Crowborough (10 miles). Dates depend on installer availability.

Can you replace glass in a composite door?

Often. Some composite doors take a standard unit; others use the maker's own cassette, which we source where possible.

Does door glass have to be safety glass?

Yes. Glass in doors up to 1,500 mm from the floor, and in side panels within 300 mm of the door edge, counts as a critical location and needs safety glass or protection.

Will new door glass affect my door's warranty?

If the door is still under its maker's warranty, check their terms first. We will tell you if the door needs the maker's own glass.

Security glass for doors in nearby towns

Other glazing in Tonbridge

Ready for a price? Use the form or call 0800 088 6248.