What is the price of security glass for doors in Romford?
Our guide range for security glass for doors in Romford is £150 to £510 including VAT (£125 to £425 plus VAT) per door, including fitting. The survey is free for new installations and your fixed price follows in writing.
Security glass for doors replaces the glazed panel in a front, back or side door with laminated safety glass, usually in a sealed unit with a toughened outer pane. It stops the common trick of breaking the glass to reach in and turn a key or thumb-turn left in the lock.
Specification at a glance
- Works with timber, uPVC, composite and aluminium doors
- Clear, obscure and decorative designs
- Internal beads or security tape so glass is much harder to remove from outside
- Laminated backing for leaded and bevelled panels
- Glass for side panels and fanlights beside the door
- Safety glass suitable for critical locations
Fitting in Romford and nearby
Whether you are in central Romford or at the edge of the RM1 district, we can arrange a survey. Nearby Hornchurch and Dagenham are covered too.
Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.
This glazing suits:
- Doors with a thumb-turn lock near the glass
- Flat entrance doors with vision panels
- Back and side doors with a large glazed panel
- Kitchen and utility doors onto the garden
Questions we will ask at the survey
Thumb-turns and keys
Laminated glass makes reaching a thumb-turn far harder. Keeping keys away from the door helps too.
Side panels too
Side panels within 300 mm of the door are critical locations as well, and a weak side panel is an easy way in. We usually do both together.
Building regulations and safety in England
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
Security rules for new homes
Approved Document Q has applied to new homes in England since 1 October 2015. Easily accessible doors and windows, meaning any part within 2 m vertically of the ground or another accessible surface, should meet PAS 24 or an equivalent, and glazing in doors and in windows within 400 mm of a door should be laminated to at least BS EN 356 P1A. It does not apply when you change the glass in an existing home, although it is a sensible benchmark.
How it works
- Postcode and a few photos
- On-site survey
- Fixed written price and lead time
- Fit, check and explain
Security glass for doors in Romford: questions
Do you cover Hornchurch as well as Romford?
Yes. As well as Romford, we can arrange surveys in nearby Hornchurch, Dagenham and Becontree. Dates depend on installer availability.
Can you replace glass in a composite door?
Often. Some composite doors take a standard unit; others use the maker's own cassette, which we source where possible.
Is toughened glass enough for a door?
It meets the safety rule but not the security need, because a broken toughened pane falls out. A laminated pane meets both.
Does door glass have to be safety glass?
Yes. Glass in doors up to 1,500 mm from the floor, and in side panels within 300 mm of the door edge, counts as a critical location and needs safety glass or protection.
Security glass for doors in nearby towns
Other glazing in Romford
- Misted unit replacement with laminated glass
- Counter and reception security screens
- Commercial reglazing
- Laminated roof and conservatory glass
- Kiosk and booth security glazing
- Security window film
Start with a guide price online, then we survey and fix the price in writing.
