Bullet-resistant glass in Warminster: what will it cost?
Our guide range for bullet-resistant glass in Warminster is £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.
Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.
Specification at a glance
- Single panes or sealed units for external use
- BS EN 1063 classes BR1 to BR7 and SG1 or SG2
- Manufacturer's test evidence supplied with your quote
- Glass-clad polycarbonate options to save weight
- Speech panels and deal trays that keep the protection continuous
- Matching rated frames, joints and transaction trays
Fitting in Warminster and nearby
Whether you are in central Warminster or at the edge of the BA12 district, we can arrange a survey. Nearby Frome and Trowbridge are covered too.
Wiltshire combines Salisbury's medieval and Georgian centre, Swindon's modern town centre, offices and estates, and stone market towns such as Marlborough, Devizes and Bradford-on-Avon.
Typical settings for bullet-resistant glass:
- Secure reception points in public buildings
- Security gatehouses and control rooms
- Bureaux de change and cash offices
- Bank, building society and post office counters
Getting the right glass for your building
Weight and structure
Ballistic glass is very heavy. The counter, floor and fixings must carry it, and some sites need a lighter glass-clad polycarbonate makeup.
The rest of the screen
Frames, joints, trays and the wall below the counter must give matching protection, or the weakest part decides the real level.
What the rules say in England
Fire-rated glass is different
Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.
Insurer requirements
Insurers set their own conditions for shops, offices, stock and cash, and some name a glazing class such as BS EN 356 P6B in the policy wording. Ask for that wording in writing before you order. The insurer decides whether the glass meets their policy; we provide the glass manufacturer's test evidence with the quote.
How it works
- Tell us about the glazing
- Survey, measuring and frame check
- Written quote naming the glass
- Fitting and handover
Bullet-resistant glass in Warminster: questions
Do you cover Frome as well as Warminster?
Yes. As well as Warminster, we can arrange surveys in nearby Frome, Trowbridge and Melksham. Dates depend on installer availability.
How thick is bullet-resistant glass?
It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.
Can you fit bullet-resistant glass into existing frames?
Rarely. Ballistic glass is thick and heavy and its rating depends on a frame tested with it. In most cases the frame and glass are replaced together.
How do I know which BR class I need?
From a risk assessment of your site, often done by your security adviser, insurer or head office. We then quote glass and framing tested to that class.
Bullet-resistant glass in nearby towns
Other glazing in Warminster
- Broken glass replacement
- Security glass for doors
- Patio and bifold door security glass
- Commercial reglazing
- Kiosk and booth security glazing
- Display case security glass
Get a guide price now and book your free survey in Warminster.