Bullet-resistant glass in Telford

Bullet-resistant glass in Telford: what will it cost?

Budget £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m² for bullet-resistant glass in Telford, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.

Options for bullet-resistant glass in Telford

Single panes or sealed units for external use
Glass-clad polycarbonate options to save weight
Speech panels and deal trays that keep the protection continuous
Manufacturer's test evidence supplied with your quote
NS (no-splinter) makeups for staff working close to the glass
Matching rated frames, joints and transaction trays

Fitting in Telford and nearby

We can arrange bullet-resistant glass across Telford, the main centre for Shropshire, and in nearby towns including Wellington, Bridgnorth and Shrewsbury.

Shropshire combines Shrewsbury's timber-framed and Georgian centre with Telford's modern town centre, business parks and estates, and hill-country towns such as Ludlow and Bridgnorth.

Typical settings for bullet-resistant glass:

Bank, building society and post office counters
Petrol station night-pay windows
Secure reception points in public buildings
Security gatehouses and control rooms

Getting the right glass for your building

S or NS

If staff sit within arm's reach of the glass, specify NS so that no splinters come off the inside face.

Weight and structure

Ballistic glass is very heavy. The counter, floor and fixings must carry it, and some sites need a lighter glass-clad polycarbonate makeup.

What the rules say in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Bullet-resistant glass in Telford: questions

Which areas near Telford do you cover?

We can arrange work in Telford and in nearby Wellington (3 miles), Bridgnorth (10 miles) and Shrewsbury (13 miles). Dates depend on installer availability.

How do I know which BR class I need?

From a risk assessment of your site, often done by your security adviser, insurer or head office. We then quote glass and framing tested to that class.

Can you fit bullet-resistant glass into existing frames?

Rarely. Ballistic glass is thick and heavy and its rating depends on a frame tested with it. In most cases the frame and glass are replaced together.

How thick is bullet-resistant glass?

It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.

Bullet-resistant glass in nearby towns

Other glazing in Telford

Get a guide price now and book your free survey in Telford.

Free quote in Telford