Bullet-resistant glass in Rutland: what will it cost?
Typical prices for bullet-resistant glass in Rutland are £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.
Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.
Glass and fitting options
- Single panes or sealed units for external use
- Speech panels and deal trays that keep the protection continuous
- NS (no-splinter) makeups for staff working close to the glass
- Built to the specification from your risk assessment
- Matching rated frames, joints and transaction trays
- Manufacturer's test evidence supplied with your quote
Covering Rutland
We can arrange surveys and fitting anywhere in Rutland, including Oakham and Uppingham. Dates depend on installer availability. Choose your town below for local details.
Rutland is small and rural, with the stone-built centres of Oakham and Uppingham, both covered by conservation areas, and limestone villages around Rutland Water.
Typical settings for bullet-resistant glass:
- Bureaux de change and cash offices
- Bank, building society and post office counters
- Secure reception points in public buildings
- Security gatehouses and control rooms
Towns in Rutland
Getting the right glass for your building
The rest of the screen
Frames, joints, trays and the wall below the counter must give matching protection, or the weakest part decides the real level.
S or NS
If staff sit within arm's reach of the glass, specify NS so that no splinters come off the inside face.
What the rules say in England
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.
Fire-rated glass is different
Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.
How it works
- Postcode and a few photos
- On-site survey
- Fixed written price and lead time
- Fit, check and explain
Bullet-resistant glass in Rutland: questions
Which towns in Rutland do you cover?
We can arrange work anywhere in Rutland, including Oakham and Uppingham.
How thick is bullet-resistant glass?
It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.
How do I know which BR class I need?
From a risk assessment of your site, often done by your security adviser, insurer or head office. We then quote glass and framing tested to that class.
Can any glass stop every bullet?
No. Glass is tested to resist particular weapons and ammunition, which is why it is called bullet-resistant and given a BS EN 1063 class rather than described as stopping everything.
Other glazing in Rutland
- Misted unit replacement with laminated glass
- Security secondary glazing
- Safety glazing for schools and public buildings
- Display case security glass
- Shopfront security glass
- Security window film
Start with a guide price online, then we survey and fix the price in writing.