Bullet-resistant glass in Stamford

What is the price of bullet-resistant glass in Stamford?

Guide prices for bullet-resistant glass in Stamford are £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m² for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.

Choices you can make

Manufacturer's test evidence supplied with your quote
BS EN 1063 classes BR1 to BR7 and SG1 or SG2
Built to the specification from your risk assessment
NS (no-splinter) makeups for staff working close to the glass
Matching rated frames, joints and transaction trays
Single panes or sealed units for external use

Fitting in Stamford and nearby

We can arrange bullet-resistant glass anywhere in Stamford, and in nearby Oakham, Uppingham and Peterborough. Tell us your postcode and we will offer dates.

Lincolnshire spans Lincoln's hilltop historic quarter, Georgian Stamford, market towns across the Wolds and Fens, and coastal resorts such as Skegness and Cleethorpes.

This glazing suits:

Security gatehouses and control rooms
Petrol station night-pay windows
Bank, building society and post office counters
Secure reception points in public buildings

Questions we will ask at the survey

S or NS

If staff sit within arm's reach of the glass, specify NS so that no splinters come off the inside face.

The rest of the screen

Frames, joints, trays and the wall below the counter must give matching protection, or the weakest part decides the real level.

Building regulations and safety in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Insurer requirements

Insurers set their own conditions for shops, offices, stock and cash, and some name a glazing class such as BS EN 356 P6B in the policy wording. Ask for that wording in writing before you order. The insurer decides whether the glass meets their policy; we provide the glass manufacturer's test evidence with the quote.

How it works

Send sizes or use the quote tool
Free survey at your Stamford address
Fixed price in writing
Glass made, then fitted

Bullet-resistant glass in Stamford: questions

Which areas near Stamford do you cover?

We can arrange work in Stamford and in nearby Oakham (10 miles), Uppingham (11 miles) and Peterborough (11 miles). Dates depend on installer availability.

How thick is bullet-resistant glass?

It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.

Can you fit bullet-resistant glass into existing frames?

Rarely. Ballistic glass is thick and heavy and its rating depends on a frame tested with it. In most cases the frame and glass are replaced together.

Can any glass stop every bullet?

No. Glass is tested to resist particular weapons and ammunition, which is why it is called bullet-resistant and given a BS EN 1063 class rather than described as stopping everything.

Bullet-resistant glass in nearby towns

Other glazing in Stamford

Ready for a price? Use the form or call 0800 088 6248.

Free quote in Stamford