Bullet-resistant glass in Lancaster

What is the price of bullet-resistant glass in Lancaster?

Typical prices for bullet-resistant glass in Lancaster are £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.

Specification at a glance

NS (no-splinter) makeups for staff working close to the glass
Built to the specification from your risk assessment
Speech panels and deal trays that keep the protection continuous
BS EN 1063 classes BR1 to BR7 and SG1 or SG2
Single panes or sealed units for external use
Matching rated frames, joints and transaction trays

Fitting in Lancaster and nearby

Whether you are in central Lancaster or at the edge of the LA1 district, we can arrange a survey. Nearby Morecambe and Fleetwood are covered too.

Lancashire pairs Victorian terraces and town-centre retail in Preston and Blackburn with Lancaster's Georgian stone streets and the seafront hotels, shops and arcades of Blackpool.

This glazing suits:

Petrol station night-pay windows
Secure reception points in public buildings
Security gatehouses and control rooms
Bank, building society and post office counters

Questions we will ask at the survey

Which BR class

Most UK counters that need ballistic protection specify a handgun class such as BR2 to BR4. Rifle classes are for specialist sites where a threat assessment calls for them.

S or NS

If staff sit within arm's reach of the glass, specify NS so that no splinters come off the inside face.

Building regulations and safety in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Insurer requirements

Insurers set their own conditions for shops, offices, stock and cash, and some name a glazing class such as BS EN 356 P6B in the policy wording. Ask for that wording in writing before you order. The insurer decides whether the glass meets their policy; we provide the glass manufacturer's test evidence with the quote.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Bullet-resistant glass in Lancaster: questions

Do you cover Morecambe as well as Lancaster?

Yes. As well as Lancaster, we can arrange surveys in nearby Morecambe, Fleetwood and Thornton-Cleveleys. Dates depend on installer availability.

Can you fit bullet-resistant glass into existing frames?

Rarely. Ballistic glass is thick and heavy and its rating depends on a frame tested with it. In most cases the frame and glass are replaced together.

How thick is bullet-resistant glass?

It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.

What does NS mean on bullet-resistant glass?

NS means no splinters came off the protected face during the test. S means some fragments did. NS is the safer choice where people sit close behind the glass.

Bullet-resistant glass in nearby towns

Other glazing in Lancaster

Start with a guide price online, then we survey and fix the price in writing.