What should bullet-resistant glass cost in Ross-on-Wye?
Typical prices for bullet-resistant glass in Ross-on-Wye are £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.
Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.
Specification at a glance
- Manufacturer's test evidence supplied with your quote
- Built to the specification from your risk assessment
- BS EN 1063 classes BR1 to BR7 and SG1 or SG2
- Speech panels and deal trays that keep the protection continuous
- Glass-clad polycarbonate options to save weight
- Single panes or sealed units for external use
Fitting in Ross-on-Wye and nearby
Whether you are in central Ross-on-Wye or at the edge of the HR9 district, we can arrange a survey. Nearby Hereford and Gloucester are covered too.
Herefordshire is largely rural, with Hereford's cathedral-city centre, black-and-white timber-framed villages, and market towns such as Leominster and Ledbury with historic centres.
Good candidates for bullet-resistant glass:
- Bureaux de change and cash offices
- Secure reception points in public buildings
- Security gatehouses and control rooms
- Bank, building society and post office counters
Before the glass is ordered
Which BR class
Most UK counters that need ballistic protection specify a handgun class such as BR2 to BR4. Rifle classes are for specialist sites where a threat assessment calls for them.
The rest of the screen
Frames, joints, trays and the wall below the counter must give matching protection, or the weakest part decides the real level.
Glazing rules in England
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.
Insurer requirements
Insurers set their own conditions for shops, offices, stock and cash, and some name a glazing class such as BS EN 356 P6B in the policy wording. Ask for that wording in writing before you order. The insurer decides whether the glass meets their policy; we provide the glass manufacturer's test evidence with the quote.
How it works
- Postcode and a few photos
- On-site survey
- Fixed written price and lead time
- Fit, check and explain
Bullet-resistant glass in Ross-on-Wye: questions
Do you cover Hereford as well as Ross-on-Wye?
Yes. As well as Ross-on-Wye, we can arrange surveys in nearby Hereford, Gloucester and Malvern. Dates depend on installer availability.
Can you fit bullet-resistant glass into existing frames?
Rarely. Ballistic glass is thick and heavy and its rating depends on a frame tested with it. In most cases the frame and glass are replaced together.
Can any glass stop every bullet?
No. Glass is tested to resist particular weapons and ammunition, which is why it is called bullet-resistant and given a BS EN 1063 class rather than described as stopping everything.
How thick is bullet-resistant glass?
It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.
Bullet-resistant glass in nearby towns
Other glazing in Ross-on-Wye
- Commercial reglazing
- Toughened safety glass
- Patio and bifold door security glass
- Anti-bandit glass
- Security secondary glazing
- Laminated security glass
Start with a guide price online, then we survey and fix the price in writing.