Bullet-resistant glass in Salford

Bullet-resistant glass in Salford: what will it cost?

As a guide, allow £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m² for bullet-resistant glass in Salford, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.

Options for bullet-resistant glass in Salford

Built to the specification from your risk assessment
Single panes or sealed units for external use
NS (no-splinter) makeups for staff working close to the glass
Matching rated frames, joints and transaction trays
BS EN 1063 classes BR1 to BR7 and SG1 or SG2
Manufacturer's test evidence supplied with your quote

Fitting in Salford and nearby

Salford is about 2 miles from Manchester, the main centre for Greater Manchester. We can survey and fit across the M6 district and in nearby places such as Eccles and Manchester.

Greater Manchester mixes city-centre offices and converted mills with Victorian terraces in Salford, Oldham and Bolton, suburban high streets and large out-of-town retail parks.

Typical settings for bullet-resistant glass:

Bureaux de change and cash offices
Secure reception points in public buildings
Security gatehouses and control rooms
Bank, building society and post office counters

Getting the right glass for your building

The rest of the screen

Frames, joints, trays and the wall below the counter must give matching protection, or the weakest part decides the real level.

Weight and structure

Ballistic glass is very heavy. The counter, floor and fixings must carry it, and some sites need a lighter glass-clad polycarbonate makeup.

What the rules say in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Bullet-resistant glass in Salford: questions

Which areas near Salford do you cover?

We can arrange work in Salford and in nearby Eccles (2 miles), Manchester (2 miles) and Swinton (3 miles). Dates depend on installer availability.

How thick is bullet-resistant glass?

It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.

Can you fit bullet-resistant glass into existing frames?

Rarely. Ballistic glass is thick and heavy and its rating depends on a frame tested with it. In most cases the frame and glass are replaced together.

What does NS mean on bullet-resistant glass?

NS means no splinters came off the protected face during the test. S means some fragments did. NS is the safer choice where people sit close behind the glass.

Bullet-resistant glass in nearby towns

Other glazing in Salford

Start with a guide price online, then we survey and fix the price in writing.

Free quote in Salford