Bullet-resistant glass in Oldham

How much should I budget for bullet-resistant glass in Oldham?

Typical prices for bullet-resistant glass in Oldham are £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.

What goes into bullet-resistant glass

Built to the specification from your risk assessment
BS EN 1063 classes BR1 to BR7 and SG1 or SG2
Manufacturer's test evidence supplied with your quote
Glass-clad polycarbonate options to save weight
Speech panels and deal trays that keep the protection continuous
Matching rated frames, joints and transaction trays

Fitting in Oldham and nearby

Surveys in Oldham (OL1) are booked around installer availability. We also cover nearby Chadderton (1 mile), Royton (2 miles) and Failsworth (3 miles).

Greater Manchester mixes city-centre offices and converted mills with Victorian terraces in Salford, Oldham and Bolton, suburban high streets and large out-of-town retail parks.

Common uses:

Bank, building society and post office counters
Security gatehouses and control rooms
Secure reception points in public buildings
Bureaux de change and cash offices

What to think about first

Weight and structure

Ballistic glass is very heavy. The counter, floor and fixings must carry it, and some sites need a lighter glass-clad polycarbonate makeup.

S or NS

If staff sit within arm's reach of the glass, specify NS so that no splinters come off the inside face.

Consents and safety: England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Guide price online or by phone
Survey in Oldham
Accept the fixed quote
Fitted by glaziers working under our contract

Bullet-resistant glass in Oldham: questions

Can you survey in Oldham and nearby towns?

Yes. Surveys in Oldham, Chadderton and Royton are booked around installer availability.

What does NS mean on bullet-resistant glass?

NS means no splinters came off the protected face during the test. S means some fragments did. NS is the safer choice where people sit close behind the glass.

How thick is bullet-resistant glass?

It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.

Can you fit bullet-resistant glass into existing frames?

Rarely. Ballistic glass is thick and heavy and its rating depends on a frame tested with it. In most cases the frame and glass are replaced together.

Bullet-resistant glass in nearby towns

Other glazing in Oldham

Tell us about the glazing and we will come back with a guide price.

Free quote in Oldham