Bullet-resistant glass in Bury: what will it cost?
Typical prices for bullet-resistant glass in Bury are £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.
Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.
What goes into bullet-resistant glass
- Built to the specification from your risk assessment
- Glass-clad polycarbonate options to save weight
- Speech panels and deal trays that keep the protection continuous
- Matching rated frames, joints and transaction trays
- Single panes or sealed units for external use
- BS EN 1063 classes BR1 to BR7 and SG1 or SG2
Fitting in Bury and nearby
Surveys in Bury (BL9) are booked around installer availability. We also cover nearby Radcliffe (3 miles), Heywood (3 miles) and Whitefield (3 miles).
Greater Manchester mixes city-centre offices and converted mills with Victorian terraces in Salford, Oldham and Bolton, suburban high streets and large out-of-town retail parks.
Typical settings for bullet-resistant glass:
- Secure reception points in public buildings
- Petrol station night-pay windows
- Bureaux de change and cash offices
- Security gatehouses and control rooms
Getting the right glass for your building
The rest of the screen
Frames, joints, trays and the wall below the counter must give matching protection, or the weakest part decides the real level.
Weight and structure
Ballistic glass is very heavy. The counter, floor and fixings must carry it, and some sites need a lighter glass-clad polycarbonate makeup.
What the rules say in England
Fire-rated glass is different
Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.
How it works
- Send sizes or use the quote tool
- Free survey at your Bury address
- Fixed price in writing
- Glass made, then fitted
Bullet-resistant glass in Bury: questions
Can you survey in Bury and nearby towns?
Yes. Surveys in Bury, Radcliffe and Heywood are booked around installer availability.
Can any glass stop every bullet?
No. Glass is tested to resist particular weapons and ammunition, which is why it is called bullet-resistant and given a BS EN 1063 class rather than described as stopping everything.
Can you fit bullet-resistant glass into existing frames?
Rarely. Ballistic glass is thick and heavy and its rating depends on a frame tested with it. In most cases the frame and glass are replaced together.
How thick is bullet-resistant glass?
It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.
Bullet-resistant glass in nearby towns
Other glazing in Bury
- Security double-glazed units
- Counter and reception security screens
- Display case security glass
- Toughened safety glass
- Misted unit replacement with laminated glass
- Laminated glass retrofit
Ready for a price? Use the form or call 0800 088 6248.