Bullet-resistant glass in Grays

What should bullet-resistant glass cost in Grays?

Budget £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m² for bullet-resistant glass in Grays, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.

Options for bullet-resistant glass in Grays

BS EN 1063 classes BR1 to BR7 and SG1 or SG2
NS (no-splinter) makeups for staff working close to the glass
Manufacturer's test evidence supplied with your quote
Built to the specification from your risk assessment
Single panes or sealed units for external use
Speech panels and deal trays that keep the protection continuous

Fitting in Grays and nearby

Grays is about 17 miles from Southend-on-Sea, the main centre for Essex. We can survey and fit across the RM17 district and in nearby places such as South Ockendon and Gravesend.

Essex runs from Chelmsford and Colchester's town-centre retail and Georgian streets to Southend's seafront and large post-war and new-build estates in Basildon and Harlow.

Good candidates for bullet-resistant glass:

Secure reception points in public buildings
Security gatehouses and control rooms
Bank, building society and post office counters
Bureaux de change and cash offices

Before the glass is ordered

Which BR class

Most UK counters that need ballistic protection specify a handgun class such as BR2 to BR4. Rifle classes are for specialist sites where a threat assessment calls for them.

The rest of the screen

Frames, joints, trays and the wall below the counter must give matching protection, or the weakest part decides the real level.

Glazing rules in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Bullet-resistant glass in Grays: questions

Which areas near Grays do you cover?

We can arrange work in Grays and in nearby South Ockendon (3 miles), Gravesend (3 miles) and Dartford (5 miles). Dates depend on installer availability.

How do I know which BR class I need?

From a risk assessment of your site, often done by your security adviser, insurer or head office. We then quote glass and framing tested to that class.

Can you fit bullet-resistant glass into existing frames?

Rarely. Ballistic glass is thick and heavy and its rating depends on a frame tested with it. In most cases the frame and glass are replaced together.

How thick is bullet-resistant glass?

It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.

Bullet-resistant glass in nearby towns

Other glazing in Grays

Get a guide price now and book your free survey in Grays.

Free quote in Grays