Bullet-resistant glass in Clacton-on-Sea

Bullet-resistant glass in Clacton-on-Sea: what will it cost?

Typical prices for bullet-resistant glass in Clacton-on-Sea are £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.

Options for bullet-resistant glass in Clacton-on-Sea

Manufacturer's test evidence supplied with your quote
Glass-clad polycarbonate options to save weight
Single panes or sealed units for external use
NS (no-splinter) makeups for staff working close to the glass
BS EN 1063 classes BR1 to BR7 and SG1 or SG2
Built to the specification from your risk assessment

Fitting in Clacton-on-Sea and nearby

Clacton-on-Sea is about 26 miles from Southend-on-Sea, the main centre for Essex. We can survey and fit across the CO15 district and in nearby places such as Harwich and Colchester.

Essex runs from Chelmsford and Colchester's town-centre retail and Georgian streets to Southend's seafront and large post-war and new-build estates in Basildon and Harlow.

Typical settings for bullet-resistant glass:

Security gatehouses and control rooms
Bank, building society and post office counters
Petrol station night-pay windows
Secure reception points in public buildings

Getting the right glass for your building

The rest of the screen

Frames, joints, trays and the wall below the counter must give matching protection, or the weakest part decides the real level.

Weight and structure

Ballistic glass is very heavy. The counter, floor and fixings must carry it, and some sites need a lighter glass-clad polycarbonate makeup.

What the rules say in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Bullet-resistant glass in Clacton-on-Sea: questions

Which areas near Clacton-on-Sea do you cover?

We can arrange work in Clacton-on-Sea and in nearby Harwich (12 miles), Colchester (13 miles) and Felixstowe (15 miles). Dates depend on installer availability.

How do I know which BR class I need?

From a risk assessment of your site, often done by your security adviser, insurer or head office. We then quote glass and framing tested to that class.

Can you fit bullet-resistant glass into existing frames?

Rarely. Ballistic glass is thick and heavy and its rating depends on a frame tested with it. In most cases the frame and glass are replaced together.

Can any glass stop every bullet?

No. Glass is tested to resist particular weapons and ammunition, which is why it is called bullet-resistant and given a BS EN 1063 class rather than described as stopping everything.

Bullet-resistant glass in nearby towns

Other glazing in Clacton-on-Sea

Get a guide price now and book your free survey in Clacton-on-Sea.