Bullet-resistant glass in Pembroke Dock: what will it cost?
Typical prices for bullet-resistant glass in Pembroke Dock are £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.
Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.
What you can specify
- Built to the specification from your risk assessment
- Manufacturer's test evidence supplied with your quote
- Single panes or sealed units for external use
- BS EN 1063 classes BR1 to BR7 and SG1 or SG2
- Glass-clad polycarbonate options to save weight
- Speech panels and deal trays that keep the protection continuous
Fitting in Pembroke Dock
We arrange surveys and fitting in Pembroke Dock and across the SA72 postcode district. Tell us your postcode and we will offer dates.
Dyfed covers the town-centre shops of Carmarthen and Llanelli, the university town of Aberystwyth, and Pembrokeshire harbour towns such as Tenby, with exposed properties along the west coast.
Typical settings for bullet-resistant glass:
- Security gatehouses and control rooms
- Bank, building society and post office counters
- Secure reception points in public buildings
- Bureaux de change and cash offices
Getting the right glass for your building
S or NS
If staff sit within arm's reach of the glass, specify NS so that no splinters come off the inside face.
Which BR class
Most UK counters that need ballistic protection specify a handgun class such as BR2 to BR4. Rifle classes are for specialist sites where a threat assessment calls for them.
What the rules say in Wales
Fire-rated glass is different
Glass in fire doors and fire screens must be fire-rated glass tested as part of that door or screen, under Approved Document B for Wales and, in non-domestic premises, the Regulatory Reform (Fire Safety) Order 2005. Security and laminated glass are not fire-rated unless the product is tested for it, so the two cannot simply be swapped.
Insurer requirements
Insurers in Wales, as elsewhere, can set conditions for premises, stock and cash, sometimes naming a BS EN 356 class for shop or counter glass. Get the policy wording in writing before ordering. The insurer decides whether the glass meets it, and the glass manufacturer's test evidence comes with our quote.
How it works
- Guide price online or by phone
- Survey in Pembroke Dock
- Accept the fixed quote
- Fitted by glaziers working under our contract
Bullet-resistant glass in Pembroke Dock: questions
Do you cover Haverfordwest as well as Pembroke Dock?
Yes. As well as Pembroke Dock, we can arrange work in nearby Haverfordwest. Dates depend on installer availability.
How thick is bullet-resistant glass?
It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.
What does NS mean on bullet-resistant glass?
NS means no splinters came off the protected face during the test. S means some fragments did. NS is the safer choice where people sit close behind the glass.
Can any glass stop every bullet?
No. Glass is tested to resist particular weapons and ammunition, which is why it is called bullet-resistant and given a BS EN 1063 class rather than described as stopping everything.
Bullet-resistant glass in nearby towns
Other glazing in Pembroke Dock
- Security double-glazed units
- Toughened safety glass
- Glazing bead security upgrades
- Shopfront security glass
- Laminated security glass
- Patio and bifold door security glass
Tell us about the glazing and we will come back with a guide price.