Bullet-resistant glass in Stockton-on-Tees

How much should I budget for bullet-resistant glass in Stockton-on-Tees?

As a guide, allow £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m² for bullet-resistant glass in Stockton-on-Tees, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.

Glass and fitting options

Built to the specification from your risk assessment
BS EN 1063 classes BR1 to BR7 and SG1 or SG2
Speech panels and deal trays that keep the protection continuous
Matching rated frames, joints and transaction trays
Single panes or sealed units for external use
Manufacturer's test evidence supplied with your quote

Fitting in Stockton-on-Tees and nearby

From the TS19 district we also cover Billingham (2 miles) and Thornaby-on-Tees (3 miles). Survey dates depend on installer availability.

County Durham runs from Durham City's listed streets around the cathedral to former colliery-village terraces, Darlington's Victorian centre and newer estates along the A1(M).

Common uses:

Bank, building society and post office counters
Petrol station night-pay windows
Bureaux de change and cash offices
Security gatehouses and control rooms

What to think about first

The rest of the screen

Frames, joints, trays and the wall below the counter must give matching protection, or the weakest part decides the real level.

Which BR class

Most UK counters that need ballistic protection specify a handgun class such as BR2 to BR4. Rifle classes are for specialist sites where a threat assessment calls for them.

Consents and safety: England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Bullet-resistant glass in Stockton-on-Tees: questions

Can you survey in Stockton-on-Tees and nearby towns?

Yes. Surveys in Stockton-on-Tees, Billingham and Thornaby-on-Tees are booked around installer availability.

Can you fit bullet-resistant glass into existing frames?

Rarely. Ballistic glass is thick and heavy and its rating depends on a frame tested with it. In most cases the frame and glass are replaced together.

How thick is bullet-resistant glass?

It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.

Can any glass stop every bullet?

No. Glass is tested to resist particular weapons and ammunition, which is why it is called bullet-resistant and given a BS EN 1063 class rather than described as stopping everything.

Bullet-resistant glass in nearby towns

Other glazing in Stockton-on-Tees

Get a guide price now and book your free survey in Stockton-on-Tees.