Bullet-resistant glass in Consett

How much should I budget for bullet-resistant glass in Consett?

As a guide, allow £995 to £2,995 plus VAT (£1,194 to £3,594 inc VAT) per m² for bullet-resistant glass in Consett, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Bullet-resistant glass is a thick laminated composite of glass, interlayers and often polycarbonate that is tested to stop specific firearms under BS EN 1063. The class, from BR1 to BR7 plus the shotgun classes SG1 and SG2, describes the weapon and ammunition the glass has been shown to stop. Ratings belong to the manufacturer's tested product, and their test evidence comes with your quote.

Glass and fitting options

Single panes or sealed units for external use
Manufacturer's test evidence supplied with your quote
Matching rated frames, joints and transaction trays
Speech panels and deal trays that keep the protection continuous
BS EN 1063 classes BR1 to BR7 and SG1 or SG2
NS (no-splinter) makeups for staff working close to the glass

Fitting in Consett and nearby

From the DH8 district we also cover Stanley (5 miles) and Chester-le-Street (10 miles). Survey dates depend on installer availability.

County Durham runs from Durham City's listed streets around the cathedral to former colliery-village terraces, Darlington's Victorian centre and newer estates along the A1(M).

Common uses:

Petrol station night-pay windows
Bureaux de change and cash offices
Security gatehouses and control rooms
Bank, building society and post office counters

What to think about first

S or NS

If staff sit within arm's reach of the glass, specify NS so that no splinters come off the inside face.

The rest of the screen

Frames, joints, trays and the wall below the counter must give matching protection, or the weakest part decides the real level.

Consents and safety: England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Bullet-resistant glass in Consett: questions

Can you survey in Consett and nearby towns?

Yes. Surveys in Consett, Stanley and Chester-le-Street are booked around installer availability.

What does NS mean on bullet-resistant glass?

NS means no splinters came off the protected face during the test. S means some fragments did. NS is the safer choice where people sit close behind the glass.

How thick is bullet-resistant glass?

It ranges from around 20 mm for lower handgun classes to well over 50 mm for rifle classes, depending on the manufacturer's makeup and whether polycarbonate is used.

How do I know which BR class I need?

From a risk assessment of your site, often done by your security adviser, insurer or head office. We then quote glass and framing tested to that class.

Bullet-resistant glass in nearby towns

Other glazing in Consett

Get a guide price now and book your free survey in Consett.

Free quote in Consett