Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · England

Blast-resistant glazing in Worcestershire

Blast-resistant glazing across Worcestershire, from Worcester and Redditch to smaller towns, specified after a free survey.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Worcestershire

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

Blast-resistant glazing in Worcestershire: what will it cost?

As a guide, allow £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Worcestershire, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What you can specify

  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Laminated glass with thick or stiff interlayers
  • Anti-shatter film with edge-retention systems for existing windows
  • Deep-bite frames and structural silicone or mechanical retention
  • Blast-resistant net curtains as a fragment-catching layer
  • Manufacturer's test evidence supplied with your quote

Covering Worcestershire

We can arrange surveys and fitting anywhere in Worcestershire, including Worcester and Redditch. Dates depend on installer availability. Choose your town below for local details.

Worcestershire includes Worcester's cathedral-city centre, Georgian streets in Bewdley and Pershore, Malvern's Victorian villas, and newer estates around Redditch and Bromsgrove.

Typical settings for blast-resistant glazing:

  • Laboratories and industrial sites with process risks
  • Transport hubs, venues and stadium frontages
  • Embassies, courts and police premises
  • Offices in city centres and near potential targets

Towns in Worcestershire

Getting the right glass for your building

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

What the rules say in England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

  1. Guide price online or by phone
  2. Survey in Worcestershire
  3. Accept the fixed quote
  4. Fitted by glaziers working under our contract

Blast-resistant glazing in Worcestershire: questions

Which towns in Worcestershire do you cover?

We can arrange work anywhere in Worcestershire, including Worcester, Redditch, Kidderminster, Malvern and Bromsgrove, and in other towns across the area.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Other glazing in Worcestershire

Tell us about the glazing and we will come back with a guide price.

Get a guide price for Worcestershire

Free survey for new installations across Worcestershire. Fixed price in writing before anything is ordered.

CallGet a price