Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · B66 · West Midlands

Blast-resistant glazing in Smethwick

Blast-resistant glazing in Smethwick and the B66 area, measured on site and priced in writing before any glass is ordered.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Smethwick

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What is the price of blast-resistant glazing in Smethwick?

Our guide range for blast-resistant glazing in Smethwick is £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Options for blast-resistant glazing in Smethwick

  • Manufacturer's test evidence supplied with your quote
  • Anti-shatter film with edge-retention systems for existing windows
  • Sealed units with a laminated inner pane
  • Work planned from the threat assessment and engineer's design
  • Laminated glass with thick or stiff interlayers
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934

Fitting in Smethwick and nearby

Smethwick is about 3 miles from Birmingham, the main centre for West Midlands. We can survey and fit across the B66 district and in nearby places such as West Bromwich and Birmingham.

The West Midlands spans Birmingham's city-centre offices and shopping streets, Coventry's post-war precincts, Black Country terraces and long suburban high streets in Wolverhampton and Dudley.

This glazing suits:

  • Transport hubs, venues and stadium frontages
  • Laboratories and industrial sites with process risks
  • Offices in city centres and near potential targets
  • Government, council and civic buildings

Questions we will ask at the survey

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Building regulations and safety in England

England

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

  1. Tell us about the glazing
  2. Survey, measuring and frame check
  3. Written quote naming the glass
  4. Fitting and handover

Blast-resistant glazing in Smethwick: questions

Which areas near Smethwick do you cover?

We can arrange work in Smethwick and in nearby West Bromwich (2 miles), Birmingham (3 miles) and Halesowen (5 miles). Dates depend on installer availability.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Blast-resistant glazing in nearby towns

Other glazing in Smethwick

Get a guide price now and book your free survey in Smethwick.

Get a guide price for Smethwick

Free survey for new installations in Smethwick and the B66 area. Fixed price in writing before anything is ordered.

CallGet a price