Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · CV21 · Warwickshire

Blast-resistant glazing in Rugby

Need blast-resistant glazing in Rugby? Send sizes or photos for a guide price, then we survey and confirm a fixed price.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Rugby

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

Blast-resistant glazing in Rugby: what will it cost?

Guide prices for blast-resistant glazing in Rugby are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What you can specify

  • Laminated glass with thick or stiff interlayers
  • Deep-bite frames and structural silicone or mechanical retention
  • Work planned from the threat assessment and engineer's design
  • Sealed units with a laminated inner pane
  • Blast-resistant net curtains as a fragment-catching layer
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934

Fitting in Rugby and nearby

We arrange surveys and fitting in Rugby and across the CV21 postcode district, as well as in nearby Daventry (9 miles) and Coventry (11 miles). Dates depend on installer availability.

Warwickshire has the listed timber-framed centres of Warwick and Stratford-upon-Avon, Regency terraces in Leamington Spa, and Nuneaton, Rugby and business parks near the M40 and M6.

Typical settings for blast-resistant glazing:

  • Government, council and civic buildings
  • Laboratories and industrial sites with process risks
  • Offices in city centres and near potential targets
  • Embassies, courts and police premises

Getting the right glass for your building

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

What the rules say in England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Rugby address
  3. Fixed price in writing
  4. Glass made, then fitted

Blast-resistant glazing in Rugby: questions

Do you cover Daventry as well as Rugby?

Yes. As well as Rugby, we can arrange surveys in nearby Daventry, Coventry and Bedworth. Dates depend on installer availability.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Blast-resistant glazing in nearby towns

Other glazing in Rugby

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Rugby

Free survey for new installations in Rugby and the CV21 area. Fixed price in writing before anything is ordered.

CallGet a price