Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · GU15 · Surrey

Blast-resistant glazing in Camberley

From one pane to a whole building, blast-resistant glazing in Camberley is measured on site and priced in writing after a free survey.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Camberley

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What is the price of blast-resistant glazing in Camberley?

Typical prices for blast-resistant glazing in Camberley are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Choices you can make

  • Blast-resistant net curtains as a fragment-catching layer
  • Laminated glass with thick or stiff interlayers
  • Deep-bite frames and structural silicone or mechanical retention
  • Sealed units with a laminated inner pane
  • Work planned from the threat assessment and engineer's design
  • Anti-shatter film with edge-retention systems for existing windows

Fitting in Camberley and nearby

We can arrange blast-resistant glazing anywhere in Camberley, and in nearby Sandhurst, Farnborough and Crowthorne. Tell us your postcode and we will offer dates.

Surrey's commuter towns such as Guildford, Woking and Epsom mix Victorian and inter-war houses with modern glazed offices, while Farnham and Godalming have extensive conservation areas.

This glazing suits:

  • Offices in city centres and near potential targets
  • Embassies, courts and police premises
  • Transport hubs, venues and stadium frontages
  • Government, council and civic buildings

Questions we will ask at the survey

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Building regulations and safety in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Camberley address
  3. Fixed price in writing
  4. Glass made, then fitted

Blast-resistant glazing in Camberley: questions

Which areas near Camberley do you cover?

We can arrange work in Camberley and in nearby Sandhurst (2 miles), Farnborough (3 miles) and Crowthorne (3 miles). Dates depend on installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Blast-resistant glazing in nearby towns

Other glazing in Camberley

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Camberley

Free survey for new installations in Camberley and the GU15 area. Fixed price in writing before anything is ordered.

CallGet a price