Blast-resistant glazing in Tamworth

What is the price of blast-resistant glazing in Tamworth?

As a guide, allow £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Tamworth, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What goes into blast-resistant glazing

Anti-shatter film with edge-retention systems for existing windows
Manufacturer's test evidence supplied with your quote
Deep-bite frames and structural silicone or mechanical retention
Blast-resistant net curtains as a fragment-catching layer
Sealed units with a laminated inner pane
Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934

Fitting in Tamworth and nearby

Surveys in Tamworth (B79) are booked around installer availability. We also cover nearby Lichfield (6 miles), Sutton Coldfield (7 miles) and Aldridge (9 miles).

Staffordshire mixes Stoke-on-Trent's Victorian pottery-town terraces with Lichfield's cathedral quarter, Burton's brewery streets and newer estates around Tamworth and Cannock.

This glazing suits:

Government, council and civic buildings
Laboratories and industrial sites with process risks
Transport hubs, venues and stadium frontages
Offices in city centres and near potential targets

Questions we will ask at the survey

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Building regulations and safety in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

How it works

Send sizes or use the quote tool
Free survey at your Tamworth address
Fixed price in writing
Glass made, then fitted

Blast-resistant glazing in Tamworth: questions

Can you survey in Tamworth and nearby towns?

Yes. Surveys in Tamworth, Lichfield and Sutton Coldfield are booked around installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Blast-resistant glazing in nearby towns

Other glazing in Tamworth

Ready for a price? Use the form or call 0800 088 6248.