Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · ST7 · Staffordshire

Blast-resistant glazing in Kidsgrove

From one pane to a whole building, blast-resistant glazing in Kidsgrove is measured on site and priced in writing after a free survey.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Kidsgrove

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What is the price of blast-resistant glazing in Kidsgrove?

Budget £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Kidsgrove, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What you can specify

  • Deep-bite frames and structural silicone or mechanical retention
  • Laminated glass with thick or stiff interlayers
  • Blast-resistant net curtains as a fragment-catching layer
  • Anti-shatter film with edge-retention systems for existing windows
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Sealed units with a laminated inner pane

Fitting in Kidsgrove and nearby

We arrange surveys and fitting in Kidsgrove and across the ST7 postcode district, as well as in nearby Congleton (5 miles) and Newcastle-under-Lyme (6 miles). Dates depend on installer availability.

Staffordshire mixes Stoke-on-Trent's Victorian pottery-town terraces with Lichfield's cathedral quarter, Burton's brewery streets and newer estates around Tamworth and Cannock.

This glazing suits:

  • Transport hubs, venues and stadium frontages
  • Embassies, courts and police premises
  • Laboratories and industrial sites with process risks
  • Offices in city centres and near potential targets

Questions we will ask at the survey

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Building regulations and safety in England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Kidsgrove address
  3. Fixed price in writing
  4. Glass made, then fitted

Blast-resistant glazing in Kidsgrove: questions

Do you cover Congleton as well as Kidsgrove?

Yes. As well as Kidsgrove, we can arrange surveys in nearby Congleton, Newcastle-under-Lyme and Stoke-on-Trent. Dates depend on installer availability.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Blast-resistant glazing in nearby towns

Other glazing in Kidsgrove

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Kidsgrove

Free survey for new installations in Kidsgrove and the ST7 area. Fixed price in writing before anything is ordered.

CallGet a price