Blast-resistant glazing in Burnham-on-Sea

How much should I budget for blast-resistant glazing in Burnham-on-Sea?

Budget £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Burnham-on-Sea, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Specification at a glance

Sealed units with a laminated inner pane
Work planned from the threat assessment and engineer's design
Laminated glass with thick or stiff interlayers
Manufacturer's test evidence supplied with your quote
Anti-shatter film with edge-retention systems for existing windows
Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934

Fitting in Burnham-on-Sea and nearby

Whether you are in central Burnham-on-Sea or at the edge of the TA8 district, we can arrange a survey. Nearby Weston-super-Mare and Bridgwater are covered too.

Somerset's glazing runs from the Georgian sashes of Bath, a World Heritage city, to the town-centre shops of Taunton and Yeovil and the seafront at Weston-super-Mare.

Common uses:

Government, council and civic buildings
Embassies, courts and police premises
Offices in city centres and near potential targets
Laboratories and industrial sites with process risks

What to think about first

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Consents and safety: England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Blast-resistant glazing in Burnham-on-Sea: questions

Do you cover Weston-super-Mare as well as Burnham-on-Sea?

Yes. As well as Burnham-on-Sea, we can arrange surveys in nearby Weston-super-Mare, Bridgwater and Clevedon. Dates depend on installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Blast-resistant glazing in nearby towns

Other glazing in Burnham-on-Sea

Start with a guide price online, then we survey and fix the price in writing.