Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · England

Blast-resistant glazing in Rutland

Looking for blast-resistant glazing in Rutland? Get a guide price online, then a free survey and a fixed price in writing.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Rutland

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

Blast-resistant glazing in Rutland: what will it cost?

Typical prices for blast-resistant glazing in Rutland are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Specification at a glance

  • Sealed units with a laminated inner pane
  • Work planned from the threat assessment and engineer's design
  • Manufacturer's test evidence supplied with your quote
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Anti-shatter film with edge-retention systems for existing windows
  • Deep-bite frames and structural silicone or mechanical retention

Covering Rutland

We can arrange surveys and fitting anywhere in Rutland, including Oakham and Uppingham. Dates depend on installer availability. Choose your town below for local details.

Rutland is small and rural, with the stone-built centres of Oakham and Uppingham, both covered by conservation areas, and limestone villages around Rutland Water.

Typical settings for blast-resistant glazing:

  • Laboratories and industrial sites with process risks
  • Offices in city centres and near potential targets
  • Government, council and civic buildings
  • Transport hubs, venues and stadium frontages

Towns in Rutland

Getting the right glass for your building

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

What the rules say in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

  1. Tell us about the glazing
  2. Survey, measuring and frame check
  3. Written quote naming the glass
  4. Fitting and handover

Blast-resistant glazing in Rutland: questions

Which towns in Rutland do you cover?

We can arrange work anywhere in Rutland, including Oakham and Uppingham.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Other glazing in Rutland

Get a guide price now and book your free survey in Rutland.

Get a guide price for Rutland

Free survey for new installations across Rutland. Fixed price in writing before anything is ordered.

CallGet a price